Table 19. +COLP parameter command syntax
Command |
| Possible response(s) | |
+COLP=[<n>] |
|
| |
+COLP? | +COLP: <n>,<m> | ||
+COLP=? | +COLP: (list of supported <n>s) | ||
value | <n> (parameter sets/shows the result code presentation status to the TE): | ||
0 | disable | ||
| |||
| 1 | enable | |
| <m> (parameter shows the subscriber COLP service status in the network): | ||
| 0 | COLP not provisioned | |
| 1 | COLP provisioned | |
| 2 | unknown (e.g. no network, etc.) | |
| <number>, <type>, <subaddr>, <satype>, <alpha>: refer +CLIP | ||
|
|
|
1.24. Read operator names +COPN
Execute command returns the list of operator names from <numericn> that has an alphanumeric equivalent <alphan> returned.
the MT. Each operator code in the MT memory shall be
Table 20. +COPN action command syntax
Command | Possible response(s) | |
+COPN | +COPN: <numeric1>,<alpha1> | |
| [<CR><LF>+COPN: <numeric2>,<alpha2> | |
| [...]] | |
| +CME ERROR: <err> | |
+COPN=? |
| |
value | <numericn>: string type; operator in numeric format (see +COPS) | |
<alphan>: string type; operator in long alphanumeric format (see +COPS) | ||
| ||
|
|
1.25. Informative examples
1.25.1.Operator information reading
Command: AT+COPS?
Expected response: +COPS: mode, format, name mode possible values:
0:automatic registration
1:manual registration
HSDPA Standard At Commands | Page 30 of 60 | Version 1.2 |