Maxon Telecom MM-6280IND manual Signal quality +CSQ, Clock +CCLK, +CSQ action command syntax, +Csq

+CRSM	Opt.	Restricted SIM access	Supported
+CPIN	Mand	Enter PIN	Supported
	.
+CGLA		Generic UICC Logical Channel access	Not supported
+CRLA	Opt.	Restricted UICC Logical Channel access	Not supported
+CCHO	Opt.	Open Logical Channel	Not supported
+CCHC	Opt.	Close Logical Channel	Not supported
+CUAD	Opt.	UICC Application Discovery	Not supported
CACM	Opt.	Accumulated call meter	N/A
+CAMM	Opt.	Accumulated call meter maximum	N/A
+CPUC	Opt.	Price per unit and currency table	N/A
+CCWE	Opt.	Call Meter maximum event	Not supported

1.27. Signal quality +CSQ

Execution command returns received signal strength indication <rssi> and channel bit error rate <ber> from the MT..

Table 22. +CSQ action command syntax

Command	Possible response(s)
+CSQ	+CSQ: <rssi>,<ber>
	+CME ERROR: <err>
+CSQ=?	+CSQ: (list of supported <rssi>s),(list of supported <ber>s)
Value	<rssi>:
	0 -113 dBm or less
	1 -111 dBm
	2...30 -109... -53 dBm
	31 -51 dBm or greater
	99 not known or not detectable
	<ber> (in percent):
	0...7 as RXQUAL values in the table in TS 45.008 [20] subclause 8.2.4
	99 not known or not detectable

1.28. Clock +CCLK

Set command sets the real-time clock of the MT.

Table 23. +CCLK parameter command syntax

Command	Possible response(s)
+CCLK=<time>	+CME ERROR: <err>
+CCLK?	+CCLK: <time>
	+CME ERROR: <err>
+CCLK=?
Value	<time>: string type value; format is "yy/MM/dd,hh:mm:ss±zz", where
	characters indicate year (two last digits), month, day, hour, minutes,
	seconds and time zone (indicates the difference, expressed in quarters of an
	hour, between the local time and GMT; range -96...+96). E.g. 6th of May
	1994, 22:10:00 GMT+2 hours equals to "94/05/06,22:10:00+08"

HSDPA Standard At Commands Page 33 of 60 Version 1.2