Front-Panel Operating Instructions
3.8 LCD Configuration Error Messages
The
ERROR XY message. The code XY identifies the error. You will find below the list of error messages and instructions that will help you correct the problem.
CONFIG ERROR 1 Illegal combination of loopbacks: you are trying to activate simultaneously local and remote loopbacks. Only one loopback can be connected at a time.
CONFIG ERROR 2 You are trying to activate the REM REM loopback while synchronization is lost.
CONFIG ERROR 3 CONFIG ERROR 4 CONFIG ERROR 5
You are trying to select the internal clock mode on the remote side.
You are trying to disconnect a loopback that is not active.
You are trying to change a parameter from the front panel when the password is enabled.
CONFIG ERROR 6 You are trying to select a node number greater than 255.