RAD Data comm ASMI-450 operation manual Command Purpose Options

ASMi-450 Control from the Control Port

Table 4-A. ASMi-450 Command Set Index

Command	Purpose	Options
CLR ALM	Clear the alarms stored in the ASMi-450 alarm buffer	/A
CLR LOOP L PORT	Clear user-initiated loopbacks or tests
CLR LP L PORT
CLR LOOP R R PORT
CLR LP R R PORT
CLR TST	Clear all the user-initiated tests and loopbacks
DATE	Set the date for the ASMi-450 internal clock
DEF AGENT	Define the SNMP agent configuration parameters
DEF NAME	Define the logical name of the ASMi-450
DEF NODE	Define the node number of the ASMi-450
DEF PWD	Define new password
DEF SP	Define control port parameters
DEF SYS	Define system parameters
DEF TERM	Define the supervision terminal type and control sequences
DSP ALM	Display the contents of the alarm buffer and optionally clear the buffer	/C
		/CA
DSP HDR TST	Display hardware faults (detected during the power-on self-test, and
	during normal operation)
DSP ST LINE	Display status information on the HDSL lines	/R
DSP ST PORT	Display status information on the user's data port	/R
DSP ST SYS	Display system status information
EXIT	End the current control session
F	Select the codes for the “clear the screen”, “cursor right”, and “cursor
	home” commands sent to the control terminal
HELP	Displays a concise index of commands and option switches
INIT DB	Load the default configuration instead of the user configuration. Table
	4-3 lists default parameter values
INIT F	Reset the codes for “clear the screen”, “cursor right”, and “cursor
	home” to 0
LOOP L PORT	Activate a specified user-controlled loopback or test
LP L PORT
LOOP R R PORT
LP R R PORT
NODE	Select an ASMi-450 before starting a management session on a
	multidrop connection
PASSWORD	Enter the password when prompted to type the password upon the start
	of a control session
RESET	Reset the ASMi-450 system
TIME	Set the time of the ASMi-450 internal clock

4-8 ASMi-450 Installation and Operation Manual