RAD Data comm ASMI-450 operation manual Clr Tst, Date, DEF Agent

ASMi-450 Control from the Control Port

CLR TST---------------------------------------------------------------------------------------

Purpose	Deactivate all the user-initiated tests and loopbacks.
Format	CLR TST
Use	1.	To deactivate all the user-initiated tests and loopbacks, type:
		CLR TST<CR>
	2.	You will see the time and date, followed by the ASMi-450 prompt.
	3.	If no test or loopback is now activated, you will receive ERROR 2.

DATE -------------------------------------------------------------------------------------------

Purpose	Set the date for the ASMi-450 internal real-time clock.
Format	DATE
Use	1.	Type
		DATE<CR>
	2.	The ASMi-450 sends the date entry form:
		DAY	= 06
		MONTH	= 09
		YEAR	= 1995

3.Bring the cursor to the first field to be changed by pressing <CR>.

4.To change the selected field, press F to increase and B to decrease the displayed values. When done, press <CR> to move to the next field.

5.To end, press <CR> after the YEAR field. The ASMi-450 will display the TIME and DATE fields (note that DATE has changed), followed by the ASMi-450 prompt.

DEF AGENT ----------------------------------------------------------------------------------

Purpose	Display and modify the current SNMP agent parameters. Refer to Appendix B for
	additional explanations.
	To enable SNMP and Telnet management, it is necessary to define all the parameters.
Format	DEF AGENT
Use	1.	To define the SNMP agent parameters, type:
		DEF AGENT<CR>
	2.	You will see the entry line for the first parameter, TELNET_APATHY_TIME.
	3.	After selecting the desired value, press <CR> to display the second line. If you do
		not want to change the current value of a parameter, press <CR> to confirm it and
		continue to the next line, otherwise type in the new value and then press <CR>.
		Repeat the procedure until all the parameters are defined, and then press <CR> to end.

4-10 ASMi-450 Installation and Operation Manual