
102EN | APPENDIX |
*4 An optional connecting cable
*5 Displayed on the external monitor only.
*6 The channels which can be used by this wireless LAN are 1 to 11. An access point is required in addition if the wireless LAN is to be used to connect to a LAN system or the Internet. Use a
*7 Not all operations of
*8 Not all operations of
*9 The
*10 The battery operation times are the values measured in the power saving mode; they vary depending on the setup or usage.
*11 While the PC is being used, the battery charging time may taken up to 1.5 times as long as the value given here.
*12 These
Wireless LAN Specifications
Wireless frequency band | 2412 to 2462 MHz (all 11 channels) |
|
|
Modulation system | DSS (Direct Spread Spectrum system) |
| CCK (communication speed: 5.5 Mbps, 11 Mbps) |
| DQPSK (communication speed: 2 Mbps) |
| DBPSK (communication speed: 1 Mbps) |
|
|
Spread spectrum system | |
|
|
Rated output | 16 dBm |
|
|
Communication distance | Recommended communication distance |
| between PC and device serving as other end of |
| communication: 25 metres indoors |
|
|
Note: There is a correlation between the communication distance of a wireless device and its communication speed: The lower the communication speed of the wireless communication, the further the communication distance. Furthermore, the communication distance is susceptible to the effects of the ambient environment, and it may be reduced in the following cases.
•Inside condominiums and other reinforced concrete structures, houses in which metal is used in the building construction materials
•Near large pieces of furniture, etc. made of metal
MP-ACX1 AC Power Adapter (including dedicated AC Cable)
Input Voltage | AC 100 to 240 V 1.5 A 50/60Hz |
|
|
Output Voltage | DC 19 V 2.64 A |
|
|