Using the Emergency Manual Eject Bar | JVC MP-XP731GB specs

Using the Emergency Manual Eject Bar

The emergency manual eject bar at the bottom panel of the drive allows you to manually open the top cover and remove a disc from the drive in the following instances:

•supply of power to the computer is cut due to electrical power outage

•the drive malfunctions

Use the manual method only as a last resort when the open/ stop button does not work. Make sure that you have turned off your DVD-ROM and CD-R/RW drive before manually opening the top cover of the drive.

Follow these steps to manually open the top cover of the drive using the emergency manual eject bar.

1.Lift the slim DVD-ROM and CD-R/RW drive and place upside down to expose the bottom of the drive. Press the manual eject bar, located as labeled.

2. Open the top cover and carefully remove the disc.

22

Image 128

JVC MP-XP731GB warranty Using the Emergency Manual Eject Bar

Contents

MP-XP731GB 2EN Dear Customer Some DO’S and DON’TS on the Safe USE of Equipment When using the wireless LAN Radio waves emitted from wireless LANsMobile mini note PC with Radio Local Area Network Rlan Operating AT 2412 to 2462 MHz EN5 About Batteries Checking Inventory JVC Software License Agreement Copyright Ownership Grant of LicenseRestriction Transfer of the Software Limited Warranty Limitation of LiabilityTerm Termination END-USER License Agreement Copyright Ownership 10EN Restricted Rights Legend Table of Contents 12EN Parts and Component Names EN13 14EN Setting UP Unplug the jumper pin before recharging the battery pack Mounting/Dismounting the Lithium Ion Battery PackMounting Battery Pack 16EN Open the display panel Make sure that the battery pack is fully recharged ¡ Make sure that the battery pack is fully rechargedApproximate recharging times when the PC’s power is off 18EN Press the On/Off key Status indicatorsTurning On/Off Key On Initial Setup of Microsoft Windows 20ENRename your computer and click Next Click Next Enter the user name and click Next Click Finish 22EN Turn-OffClick start Click Turn Off computer JVC Original Software and System Applications Setup software Setup of JVC Original SoftwareRead the License Agreement when displayed DVC’s USB Drivers 26EN When the menu above appears, click on the desired option EnableDisable CC Converter About the expansion effect modes Harmonic ExpansionHigh tone Expansion All range Expansion PD-TS decorder 30EN Using Bootable CD Creator Bcdc RealOne Player Adobe Reader Norton AntiVirusImageMixer with VCD 1.1 VJ Pinnacle Studio 8 SE Video editing software for the broadband age To Set Up the Standard Applications Again To Uninstall a Standard Application Navigate in the Internet World Contracting with the Internet Service Provider When you have contracted with a provider36EN Contract with the provider Connection of Telephone Line and Modem Setup 38EN Seting up the modem Internet Connection Setup Click Set up my connection manually option, and click Next Click Connect using a dial-up modem option, and click Next40EN Click Connect to the Internet option, and click Next Click Finish. The setup for connection wizard is complete Enter the phone number, and click Next 42EN Internet Protocol TCP/IP Properties screen will appear Click Connect Connecting to the Internet44EN Disconnection from the Internet Accessing a Web 46EN Setting Up E-Mail Software Click start and click E-mail on the Menu 48EN Enter the Account name and Password, and click Next 50EN Sending and Receiving E-mailsTransmission Create Create a message 52EN To check the received messages, click Inbox on the screen Hardware Using the Pointing Device 54EN Scroll buttons Double-clickDrag Using Hot keys Using the Numeric Keypad56EN List of hot keys How to attach any other key top If a Key Top Has Come Off 58EN Increasing the Optional Memory Capacity Adding or Removing a Memory Board Removing the memory board 60ENMounting a memory board Checking the Additional Memory Board Total amount of memory appears on the screen Using an External Monitor Connecting an external monitor62EN LCD LCD panel of PC CRT external monitor LCD + CRT Setting the IP address manually Connecting to a NetworkSetting for Network Connection Setting a computer name or work group 64EN Checking the MAC address 66EN Types of Wireless LAN Networks Network Connections Using a Wireless LANGeneral Description of Wireless LAN 68EN Suggestions for Using the Wireless LANSetup Procedure for the Wireless LAN Set the IP address to be used by the wireless LAN Start up the PC 70EN Page 72EN Tips How to Set the Wireless LAN Function 74EN Close all screens. This completes the settings 76EN Checking the Battery LevelClick the Power Meter tab Power-saving Mode System in halt status 78ENSystem in standby status Unknown Partition on Hard Disk 80EN PC Recovery Repeated PC Setup Setting Up Your PC Again What is the Recovery?Before Starting Repeated Setup Repeated Setup System Recovery Procedure Select the recovery method disk partitioningIf you respond with a If you respond with C Computer Wiederherstellung Recovery 84EN Troubleshooting Power Power does not turn on86EN If the Q&A does not help you Terminating an application forcibly Startup and Operation of WindowsScreen has hung Tips PC is turned on but nothing appears on the screen When the Stand By lamp is not litDisplay Cannot dial up Using the Internet90EN Check the dialing setting PC dials but connection is not established Check the following Check the user name and password Advice when using the internal modem92EN PC cannot send or receive e-mail messages Wireless LAN If the wireless LAN cannot be set to on or OFFHas the security been set correctly? Has the IP address been set correctly? Battery Battery is not chargedBattery discharge faster than expected 94EN Forgot the password MiscellaneousPC is hot PC makes no sound Setting procedure does not complete 96EN Appendix 98EN List of Support Centres Trademark Notice 100EN How to DisposalHow to remove the lithium-ion battery pack Specification Main unit 102EN Wireless LAN SpecificationsMP-ACX1 AC Power Adapter including dedicated AC Cable Options separately available MP-VGX2E 104EN Memo 0197 MP-WDX2E Safety Precautions Some DO’S and DON’TS on the Safe USE of Equipment Laser diode properties Location of the required label Copyrights/Disclaimer Contents Installation Notices Using the Device Conventions used in this guide Package Contents Specifications Product Introduction Features Left Side Panel PanelTop Cover Panel Front Panel Right Side PanelRear Panel For Notebook or PC InstallationSystem Requirements Connecting the Drive Cables Installation and Use Using the AC plug adapter Removing the AC plug adapter Checking the Drive in the System For Windows OS Unplugging the MP-WDX2E Device Locate the Safely Remove Hardware icon found in the taskbar Drive Basics Placing a Disc into the Drive Ejecting a Disc from the Drive Using the Emergency Manual Eject Bar Handling a Disc Using Compact DiscsCleaning a Disc Environmental Specifications Electrical and Audio SpecificationsAC Power Adapter ADP-15AH Technical Information Memo 0903KHY Idass