EN 59

Adding or Removing a Memory Board

If you have operated your PC, its inside may be hot and you may get a burn. Turn the power switch off and wait for the PC to cool down.

1.Turn the PC Power switch off, and disconnect AC adapter from your PC. Then, remove the standard lithium ion battery pack (if any) and all other peripherals from your PC.

2.Remove the built-in lithium ion battery pack and the memory expansion cover by taking the following steps.

1)Turn your PC upside down, and remove screws 1 to 4.

2)Remove the built-in lithium ion battery pack.

3)Open the memory expansion cover.

1)

Built in battery pack

2)3)

Remove the battery pack by sliding it in this direction.

Cautions

Screw 1 (10 mm) is different in length from screws 2 to 4 (3 mm). Using a wrong screw can damage your PC.

Do not loosen any other screws, otherwise, your PC may fail.

3.Discharge any static electricity from your body by touching something metallic nearby. (Not on the PC)

4.Add or remove a memory board. Caution

Add the 256M-byte memory board to expand the PC’s memory capacity of the MP-XP731GB to the maximum 512M-bytes. Refer to page 60 for the procedure to mount and remove the memory board.

Page 59
Image 59
JVC MP-XP731GB warranty Adding or Removing a Memory Board