96EN, Setting procedure does not complete | JVC MP-XP731GB instruction

96EN	TROUBLESHOOTING

•If you forget the BIOS password

The following passwords can be set on the BIOS.

•Supervisor Password

This is the password used by the administrator. If it has been set, it means that only an individual who inputs this password correctly can set or change any of the items. The user will be asked for this password at boot-up and BIOS setup.

•User password

When this password is set, the user is requested to enter the password to start Windows or change a BIOS setting.

•HDD password

The password required for accessing the hard disk.

Important

•You cannot delete the BIOS password even if you forget it. To delete it forcibly, you have to return your PC to us for chargeable service. (It may require hard disk drive replacement.)

•To bring up the BIOS menu, turn on the PC and press the Alt and F2 keys while the JVC logo screen is shown.

Do not change the BIOS setting unless you have adequate knowledge of computers. A wrong setting can make your PC unable to start up again or, worse, damage it.

Q.

A.

Setting procedure does not complete.

If Internet, e-mail, or any other setting does not complete through the procedure described in this manual, check the following.

•If the [Control Panel] display is in Classical mode, change it to the Category mode. All the setting procedures in this manual assume the Category display mode.

Image 96

JVC MP-XP731GB warranty 96EN, Setting procedure does not complete

Contents

MP-XP731GB 2EN Dear Customer Some DO’S and DON’TS on the Safe USE of Equipment When using the wireless LAN Radio waves emitted from wireless LANsMobile mini note PC with Radio Local Area Network Rlan Operating AT 2412 to 2462 MHz EN5 About Batteries Checking Inventory JVC Software License Agreement Copyright Ownership Grant of LicenseRestriction Transfer of the Software Limited Warranty Limitation of LiabilityTerm Termination END-USER License Agreement Copyright Ownership 10EN Restricted Rights Legend Table of Contents 12EN Parts and Component Names EN13 14EN Setting UP Unplug the jumper pin before recharging the battery pack Mounting/Dismounting the Lithium Ion Battery PackMounting Battery Pack 16EN Open the display panel Make sure that the battery pack is fully recharged ¡ Make sure that the battery pack is fully rechargedApproximate recharging times when the PC’s power is off 18EN Status indicators Turning On/Off Key OnPress the On/Off key Initial Setup of Microsoft Windows 20ENRename your computer and click Next Click Next Enter the user name and click Next Click Finish 22EN Turn-OffClick start Click Turn Off computer JVC Original Software and System Applications Setup of JVC Original Software Read the License Agreement when displayedSetup software DVC’s USB Drivers 26EN When the menu above appears, click on the desired option EnableDisable CC Converter About the expansion effect modes Harmonic ExpansionHigh tone Expansion All range Expansion PD-TS decorder 30EN Using Bootable CD Creator Bcdc Adobe Reader Norton AntiVirus ImageMixer with VCD 1.1 VJRealOne Player Pinnacle Studio 8 SE Video editing software for the broadband age To Set Up the Standard Applications Again To Uninstall a Standard Application Navigate in the Internet World Contracting with the Internet Service Provider When you have contracted with a provider36EN Contract with the provider Connection of Telephone Line and Modem Setup 38EN Seting up the modem Internet Connection Setup Click Set up my connection manually option, and click Next Click Connect using a dial-up modem option, and click Next40EN Click Connect to the Internet option, and click Next Click Finish. The setup for connection wizard is complete Enter the phone number, and click Next 42EN Internet Protocol TCP/IP Properties screen will appear Connecting to the Internet 44ENClick Connect Disconnection from the Internet Accessing a Web 46EN Setting Up E-Mail Software Click start and click E-mail on the Menu 48EN Enter the Account name and Password, and click Next 50EN Sending and Receiving E-mailsTransmission Create Create a message 52EN To check the received messages, click Inbox on the screen Hardware Using the Pointing Device 54EN Double-click DragScroll buttons Using Hot keys Using the Numeric Keypad56EN List of hot keys How to attach any other key top If a Key Top Has Come Off 58EN Increasing the Optional Memory Capacity Adding or Removing a Memory Board 60EN Mounting a memory boardRemoving the memory board Checking the Additional Memory Board Total amount of memory appears on the screen Using an External Monitor Connecting an external monitor62EN LCD LCD panel of PC CRT external monitor LCD + CRT Connecting to a Network Setting for Network ConnectionSetting the IP address manually Setting a computer name or work group 64EN Checking the MAC address 66EN Network Connections Using a Wireless LAN General Description of Wireless LANTypes of Wireless LAN Networks Suggestions for Using the Wireless LAN Setup Procedure for the Wireless LAN68EN Set the IP address to be used by the wireless LAN Start up the PC 70EN Page 72EN Tips How to Set the Wireless LAN Function 74EN Close all screens. This completes the settings Checking the Battery Level Click the Power Meter tab76EN Power-saving Mode 78EN System in standby statusSystem in halt status Unknown Partition on Hard Disk 80EN PC Recovery Repeated PC Setup Setting Up Your PC Again What is the Recovery?Before Starting Repeated Setup Repeated Setup System Recovery Procedure Select the recovery method disk partitioningIf you respond with a If you respond with C Computer Wiederherstellung Recovery 84EN Troubleshooting Power Power does not turn on86EN If the Q&A does not help you Startup and Operation of Windows Screen has hungTerminating an application forcibly Tips When the Stand By lamp is not lit DisplayPC is turned on but nothing appears on the screen Using the Internet 90ENCannot dial up Check the dialing setting PC dials but connection is not established Check the following Check the user name and password Advice when using the internal modem92EN PC cannot send or receive e-mail messages Wireless LAN If the wireless LAN cannot be set to on or OFFHas the security been set correctly? Has the IP address been set correctly? Battery Battery is not chargedBattery discharge faster than expected 94EN Forgot the password MiscellaneousPC is hot PC makes no sound Setting procedure does not complete 96EN Appendix 98EN List of Support Centres Trademark Notice How to Disposal How to remove the lithium-ion battery pack100EN Specification Main unit Wireless LAN Specifications MP-ACX1 AC Power Adapter including dedicated AC Cable102EN Options separately available MP-VGX2E 104EN Memo 0197 MP-WDX2E Safety Precautions Some DO’S and DON’TS on the Safe USE of Equipment Laser diode properties Location of the required label Copyrights/Disclaimer Contents Installation Notices Using the Device Conventions used in this guide Package Contents Specifications Product Introduction Features Panel Top Cover PanelLeft Side Panel Right Side Panel Rear PanelFront Panel Installation System RequirementsFor Notebook or PC Connecting the Drive Cables Installation and Use Using the AC plug adapter Removing the AC plug adapter Checking the Drive in the System For Windows OS Unplugging the MP-WDX2E Device Locate the Safely Remove Hardware icon found in the taskbar Drive Basics Placing a Disc into the Drive Ejecting a Disc from the Drive Using the Emergency Manual Eject Bar Using Compact Discs Cleaning a DiscHandling a Disc Environmental Specifications Electrical and Audio SpecificationsAC Power Adapter ADP-15AH Technical Information Memo 0903KHY Idass