78EN, System in standby status | JVC MP-XP731GB specs

78EN

HARDWARE

•System in standby status

The built-in battery discharges whilst the PC is in system standby status. As a result, any unsaved data may be lost or the system may not start up. Be sure to turn off the PC when it is not used for a long time.

Under fully charged condition, the unit can maintain the system standby status for the following periods.

1 About 25 hours with the built-in battery pack alone

2 About 75 hours with the built-in and standard battery packs

•System in halt status

Continued operation on the PC displaying a battery-low warning causes the result as follows:

1When the halt status is enabled

The PC turns off while maintaining the current data.

2When the halt status is disabled

The PC does not save the current data, which will be lost.

We recommend that you enable the halt status setting. This function is enabled at the factory.

Image 78

JVC MP-XP731GB warranty 78EN, System in standby status, System in halt status

Contents

MP-XP731GB 2EN Dear Customer Some DO’S and DON’TS on the Safe USE of Equipment Mobile mini note PC with Radio Local Area Network Rlan When using the wireless LANRadio waves emitted from wireless LANs Operating AT 2412 to 2462 MHz EN5 About Batteries Checking Inventory Restriction JVC Software License AgreementCopyright Ownership Grant of License Transfer of the Software Term Limited WarrantyLimitation of Liability Termination END-USER License Agreement Copyright Ownership 10EN Restricted Rights Legend Table of Contents 12EN Parts and Component Names EN13 14EN Setting UP Mounting Battery Pack Unplug the jumper pin before recharging the battery packMounting/Dismounting the Lithium Ion Battery Pack 16EN Open the display panel Approximate recharging times when the PC’s power is off Make sure that the battery pack is fully recharged¡ Make sure that the battery pack is fully recharged 18EN Status indicators Turning On/Off Key OnPress the On/Off key Rename your computer and click Next Initial Setup of Microsoft Windows20EN Click Next Enter the user name and click Next Click Finish Click start 22ENTurn-Off Click Turn Off computer JVC Original Software and System Applications Setup of JVC Original Software Read the License Agreement when displayedSetup software DVC’s USB Drivers 26EN Disable When the menu above appears, click on the desired optionEnable CC Converter High tone Expansion About the expansion effect modesHarmonic Expansion All range Expansion PD-TS decorder 30EN Using Bootable CD Creator Bcdc Adobe Reader Norton AntiVirus ImageMixer with VCD 1.1 VJRealOne Player Pinnacle Studio 8 SE Video editing software for the broadband age To Set Up the Standard Applications Again To Uninstall a Standard Application Navigate in the Internet World 36EN Contracting with the Internet Service ProviderWhen you have contracted with a provider Contract with the provider Connection of Telephone Line and Modem Setup 38EN Seting up the modem Internet Connection Setup 40EN Click Set up my connection manually option, and click NextClick Connect using a dial-up modem option, and click Next Click Connect to the Internet option, and click Next Click Finish. The setup for connection wizard is complete Enter the phone number, and click Next 42EN Internet Protocol TCP/IP Properties screen will appear Connecting to the Internet 44ENClick Connect Disconnection from the Internet Accessing a Web 46EN Setting Up E-Mail Software Click start and click E-mail on the Menu 48EN Enter the Account name and Password, and click Next Transmission 50ENSending and Receiving E-mails Create Create a message 52EN To check the received messages, click Inbox on the screen Hardware Using the Pointing Device 54EN Double-click DragScroll buttons 56EN Using Hot keysUsing the Numeric Keypad List of hot keys How to attach any other key top If a Key Top Has Come Off 58EN Increasing the Optional Memory Capacity Adding or Removing a Memory Board 60EN Mounting a memory boardRemoving the memory board Checking the Additional Memory Board Total amount of memory appears on the screen 62EN Using an External MonitorConnecting an external monitor LCD LCD panel of PC CRT external monitor LCD + CRT Connecting to a Network Setting for Network ConnectionSetting the IP address manually Setting a computer name or work group 64EN Checking the MAC address 66EN Network Connections Using a Wireless LAN General Description of Wireless LANTypes of Wireless LAN Networks Suggestions for Using the Wireless LAN Setup Procedure for the Wireless LAN68EN Set the IP address to be used by the wireless LAN Start up the PC 70EN Page 72EN Tips How to Set the Wireless LAN Function 74EN Close all screens. This completes the settings Checking the Battery Level Click the Power Meter tab76EN Power-saving Mode 78EN System in standby statusSystem in halt status Unknown Partition on Hard Disk 80EN PC Recovery Repeated PC Setup Before Starting Repeated Setup Setting Up Your PC AgainWhat is the Recovery? Repeated Setup If you respond with a System Recovery ProcedureSelect the recovery method disk partitioning If you respond with C Computer Wiederherstellung Recovery 84EN Troubleshooting 86EN PowerPower does not turn on If the Q&A does not help you Startup and Operation of Windows Screen has hungTerminating an application forcibly Tips When the Stand By lamp is not lit DisplayPC is turned on but nothing appears on the screen Using the Internet 90ENCannot dial up Check the dialing setting PC dials but connection is not established 92EN Check the following Check the user name and passwordAdvice when using the internal modem PC cannot send or receive e-mail messages Has the security been set correctly? Wireless LANIf the wireless LAN cannot be set to on or OFF Has the IP address been set correctly? Battery discharge faster than expected BatteryBattery is not charged 94EN PC is hot Forgot the passwordMiscellaneous PC makes no sound Setting procedure does not complete 96EN Appendix 98EN List of Support Centres Trademark Notice How to Disposal How to remove the lithium-ion battery pack100EN Specification Main unit Wireless LAN Specifications MP-ACX1 AC Power Adapter including dedicated AC Cable102EN Options separately available MP-VGX2E 104EN Memo 0197 MP-WDX2E Safety Precautions Some DO’S and DON’TS on the Safe USE of Equipment Laser diode properties Location of the required label Copyrights/Disclaimer Contents Installation Notices Using the Device Conventions used in this guide Package Contents Specifications Product Introduction Features Panel Top Cover PanelLeft Side Panel Right Side Panel Rear PanelFront Panel Installation System RequirementsFor Notebook or PC Connecting the Drive Cables Installation and Use Using the AC plug adapter Removing the AC plug adapter Checking the Drive in the System For Windows OS Unplugging the MP-WDX2E Device Locate the Safely Remove Hardware icon found in the taskbar Drive Basics Placing a Disc into the Drive Ejecting a Disc from the Drive Using the Emergency Manual Eject Bar Using Compact Discs Cleaning a DiscHandling a Disc AC Power Adapter ADP-15AH Environmental SpecificationsElectrical and Audio Specifications Technical Information Memo 0903KHY Idass