Right Side Panel, Rear Panel, Front Panel | JVC MP-XP731GB guide

Right Side Panel

4 5

4. Power switch

Turns the power supply ON or OFF. Switching to the right turns the machine OFF and switching to the left turns it ON.

5. Power/Read/Write Indicator

This LED flashes green when drive power is turned ON, when reading data from a disc or when the USB connection is established.It flashes red when data is being written on a disc. The LED turns off when drive power supply is OFF.

Rear Panel

ENGLISH

6

7

8

6. Headphone Jack

This jack allows you to connect a headphone with a stereo mini-plug.

7. Headphone Volume Dial

To adjust volume of headphone connected, turn dial to the left to decrease volume; turn to the right to increase volume.

8. USB connector

A standard Universal Serial Bus (USB 2.0) plug and play interface.

Front Panel

13

Image 119

JVC MP-XP731GB warranty Right Side Panel, Rear Panel, Front Panel

Contents

MP-XP731GB Dear Customer 2EN Some DO’S and DON’TS on the Safe USE of Equipment Operating AT 2412 to 2462 MHz When using the wireless LANRadio waves emitted from wireless LANs Mobile mini note PC with Radio Local Area Network Rlan About Batteries EN5 Checking Inventory Transfer of the Software JVC Software License AgreementCopyright Ownership Grant of License Restriction Termination Limited WarrantyLimitation of Liability Term Copyright Ownership END-USER License Agreement Restricted Rights Legend 10EN Table of Contents Parts and Component Names 12EN EN13 14EN Setting UP 16EN Unplug the jumper pin before recharging the battery packMounting/Dismounting the Lithium Ion Battery Pack Mounting Battery Pack Open the display panel 18EN Make sure that the battery pack is fully recharged¡ Make sure that the battery pack is fully recharged Approximate recharging times when the PC’s power is off Press the On/Off key Status indicatorsTurning On/Off Key On Click Next Initial Setup of Microsoft Windows20EN Rename your computer and click Next Click Finish Enter the user name and click Next Click Turn Off computer 22ENTurn-Off Click start JVC Original Software and System Applications Setup software Setup of JVC Original SoftwareRead the License Agreement when displayed DVC’s USB Drivers 26EN CC Converter When the menu above appears, click on the desired optionEnable Disable All range Expansion About the expansion effect modesHarmonic Expansion High tone Expansion PD-TS decorder 30EN Using Bootable CD Creator Bcdc RealOne Player Adobe Reader Norton AntiVirusImageMixer with VCD 1.1 VJ Video editing software for the broadband age Pinnacle Studio 8 SE To Uninstall a Standard Application To Set Up the Standard Applications Again Navigate in the Internet World Contract with the provider Contracting with the Internet Service ProviderWhen you have contracted with a provider 36EN Connection of Telephone Line and Modem Setup Seting up the modem 38EN Internet Connection Setup Click Connect to the Internet option, and click Next Click Set up my connection manually option, and click NextClick Connect using a dial-up modem option, and click Next 40EN Enter the phone number, and click Next Click Finish. The setup for connection wizard is complete 42EN Internet Protocol TCP/IP Properties screen will appear Click Connect Connecting to the Internet44EN Disconnection from the Internet 46EN Accessing a Web Click start and click E-mail on the Menu Setting Up E-Mail Software 48EN Enter the Account name and Password, and click Next Create 50ENSending and Receiving E-mails Transmission Create a message To check the received messages, click Inbox on the screen 52EN Hardware 54EN Using the Pointing Device Scroll buttons Double-clickDrag List of hot keys Using Hot keysUsing the Numeric Keypad 56EN If a Key Top Has Come Off How to attach any other key top Increasing the Optional Memory Capacity 58EN Adding or Removing a Memory Board Removing the memory board 60ENMounting a memory board Total amount of memory appears on the screen Checking the Additional Memory Board LCD LCD panel of PC CRT external monitor LCD + CRT Using an External MonitorConnecting an external monitor 62EN Setting the IP address manually Connecting to a NetworkSetting for Network Connection 64EN Setting a computer name or work group Checking the MAC address 66EN Types of Wireless LAN Networks Network Connections Using a Wireless LANGeneral Description of Wireless LAN 68EN Suggestions for Using the Wireless LANSetup Procedure for the Wireless LAN Start up the PC Set the IP address to be used by the wireless LAN 70EN Page 72EN Tips 74EN How to Set the Wireless LAN Function Close all screens. This completes the settings 76EN Checking the Battery LevelClick the Power Meter tab Power-saving Mode System in halt status 78ENSystem in standby status Unknown Partition on Hard Disk 80EN PC Recovery Repeated PC Setup Repeated Setup Setting Up Your PC AgainWhat is the Recovery? Before Starting Repeated Setup If you respond with C System Recovery ProcedureSelect the recovery method disk partitioning If you respond with a 84EN Computer Wiederherstellung Recovery Troubleshooting If the Q&A does not help you PowerPower does not turn on 86EN Terminating an application forcibly Startup and Operation of WindowsScreen has hung Tips PC is turned on but nothing appears on the screen When the Stand By lamp is not litDisplay Cannot dial up Using the Internet90EN PC dials but connection is not established Check the dialing setting PC cannot send or receive e-mail messages Check the following Check the user name and passwordAdvice when using the internal modem 92EN Has the IP address been set correctly? Wireless LANIf the wireless LAN cannot be set to on or OFF Has the security been set correctly? 94EN BatteryBattery is not charged Battery discharge faster than expected PC makes no sound Forgot the passwordMiscellaneous PC is hot 96EN Setting procedure does not complete Appendix List of Support Centres 98EN Trademark Notice 100EN How to DisposalHow to remove the lithium-ion battery pack Main unit Specification 102EN Wireless LAN SpecificationsMP-ACX1 AC Power Adapter including dedicated AC Cable MP-VGX2E Options separately available 104EN Memo 0197 MP-WDX2E Safety Precautions Some DO’S and DON’TS on the Safe USE of Equipment Location of the required label Laser diode properties Copyrights/Disclaimer Contents Installation Notices Conventions used in this guide Using the Device Package Contents Product Introduction Specifications Features Left Side Panel PanelTop Cover Panel Front Panel Right Side PanelRear Panel For Notebook or PC InstallationSystem Requirements Connecting the Drive Cables Using the AC plug adapter Installation and Use Removing the AC plug adapter For Windows OS Checking the Drive in the System Locate the Safely Remove Hardware icon found in the taskbar Unplugging the MP-WDX2E Device Placing a Disc into the Drive Drive Basics Ejecting a Disc from the Drive Using the Emergency Manual Eject Bar Handling a Disc Using Compact DiscsCleaning a Disc Technical Information Environmental SpecificationsElectrical and Audio Specifications AC Power Adapter ADP-15AH Memo 0903KHY Idass