Display, When the Stand By lamp is not lit | JVC MP-XP731GB guide

EN 89

Display

Q. The PC is turned on but nothing appears on the screen.

A. If the screen blacks out during operation, check the following.

•When the (Stand By) lamp is lit.

•Move the stick or press any key on the keyboard to check if the power-saving function is working.

•Check if the display is configured as an external display device.

While pressing Fn , press F10 . (Each time you do this, you can change between external display and LCD modes.)

•

•

•To adjust the LCD display brightness: Pressing Fn and F1 turns the screen darker. Pressing Fn and F2 turns the screen brighter.

When the (Stand By) lamp is flashing.

The PC is in standby mode (The power-saving mode is working).

Press the On/Off key or any key on the keyboard.

Important

Pressing the (On/Off) key for more than 4 seconds terminates Windows forcibly, discarding the unsaved data.

When the (Stand By) lamp is not lit.

The PC is turned off. Press the (On/Off) key to turn on your PC.

Image 89

JVC MP-XP731GB warranty Display, PC is turned on but nothing appears on the screen, When the Stand By lamp is not lit

Contents

MP-XP731GB Dear Customer 2EN Some DO’S and DON’TS on the Safe USE of Equipment Radio waves emitted from wireless LANs When using the wireless LANMobile mini note PC with Radio Local Area Network Rlan Operating AT 2412 to 2462 MHz About Batteries EN5 Checking Inventory Copyright Ownership Grant of License JVC Software License AgreementRestriction Transfer of the Software Limitation of Liability Limited WarrantyTerm Termination Copyright Ownership END-USER License Agreement Restricted Rights Legend 10EN Table of Contents Parts and Component Names 12EN EN13 14EN Setting UP Mounting/Dismounting the Lithium Ion Battery Pack Unplug the jumper pin before recharging the battery packMounting Battery Pack 16EN Open the display panel ¡ Make sure that the battery pack is fully recharged Make sure that the battery pack is fully rechargedApproximate recharging times when the PC’s power is off 18EN Press the On/Off key Status indicatorsTurning On/Off Key On 20EN Initial Setup of Microsoft WindowsRename your computer and click Next Click Next Click Finish Enter the user name and click Next Turn-Off 22ENClick start Click Turn Off computer JVC Original Software and System Applications Setup software Setup of JVC Original SoftwareRead the License Agreement when displayed DVC’s USB Drivers 26EN Enable When the menu above appears, click on the desired optionDisable CC Converter Harmonic Expansion About the expansion effect modesHigh tone Expansion All range Expansion PD-TS decorder 30EN Using Bootable CD Creator Bcdc RealOne Player Adobe Reader Norton AntiVirusImageMixer with VCD 1.1 VJ Video editing software for the broadband age Pinnacle Studio 8 SE To Uninstall a Standard Application To Set Up the Standard Applications Again Navigate in the Internet World When you have contracted with a provider Contracting with the Internet Service Provider36EN Contract with the provider Connection of Telephone Line and Modem Setup Seting up the modem 38EN Internet Connection Setup Click Connect using a dial-up modem option, and click Next Click Set up my connection manually option, and click Next40EN Click Connect to the Internet option, and click Next Enter the phone number, and click Next Click Finish. The setup for connection wizard is complete 42EN Internet Protocol TCP/IP Properties screen will appear Click Connect Connecting to the Internet44EN Disconnection from the Internet 46EN Accessing a Web Click start and click E-mail on the Menu Setting Up E-Mail Software 48EN Enter the Account name and Password, and click Next Sending and Receiving E-mails 50ENTransmission Create Create a message To check the received messages, click Inbox on the screen 52EN Hardware 54EN Using the Pointing Device Scroll buttons Double-clickDrag Using the Numeric Keypad Using Hot keys56EN List of hot keys If a Key Top Has Come Off How to attach any other key top Increasing the Optional Memory Capacity 58EN Adding or Removing a Memory Board Removing the memory board 60ENMounting a memory board Total amount of memory appears on the screen Checking the Additional Memory Board Connecting an external monitor Using an External Monitor62EN LCD LCD panel of PC CRT external monitor LCD + CRT Setting the IP address manually Connecting to a NetworkSetting for Network Connection 64EN Setting a computer name or work group Checking the MAC address 66EN Types of Wireless LAN Networks Network Connections Using a Wireless LANGeneral Description of Wireless LAN 68EN Suggestions for Using the Wireless LANSetup Procedure for the Wireless LAN Start up the PC Set the IP address to be used by the wireless LAN 70EN Page 72EN Tips 74EN How to Set the Wireless LAN Function Close all screens. This completes the settings 76EN Checking the Battery LevelClick the Power Meter tab Power-saving Mode System in halt status 78ENSystem in standby status Unknown Partition on Hard Disk 80EN PC Recovery Repeated PC Setup What is the Recovery? Setting Up Your PC AgainBefore Starting Repeated Setup Repeated Setup Select the recovery method disk partitioning System Recovery ProcedureIf you respond with a If you respond with C 84EN Computer Wiederherstellung Recovery Troubleshooting Power does not turn on Power86EN If the Q&A does not help you Terminating an application forcibly Startup and Operation of WindowsScreen has hung Tips PC is turned on but nothing appears on the screen When the Stand By lamp is not litDisplay Cannot dial up Using the Internet90EN PC dials but connection is not established Check the dialing setting Advice when using the internal modem Check the following Check the user name and password92EN PC cannot send or receive e-mail messages If the wireless LAN cannot be set to on or OFF Wireless LANHas the security been set correctly? Has the IP address been set correctly? Battery is not charged BatteryBattery discharge faster than expected 94EN Miscellaneous Forgot the passwordPC is hot PC makes no sound 96EN Setting procedure does not complete Appendix List of Support Centres 98EN Trademark Notice 100EN How to DisposalHow to remove the lithium-ion battery pack Main unit Specification 102EN Wireless LAN SpecificationsMP-ACX1 AC Power Adapter including dedicated AC Cable MP-VGX2E Options separately available 104EN Memo 0197 MP-WDX2E Safety Precautions Some DO’S and DON’TS on the Safe USE of Equipment Location of the required label Laser diode properties Copyrights/Disclaimer Contents Installation Notices Conventions used in this guide Using the Device Package Contents Product Introduction Specifications Features Left Side Panel PanelTop Cover Panel Front Panel Right Side PanelRear Panel For Notebook or PC InstallationSystem Requirements Connecting the Drive Cables Using the AC plug adapter Installation and Use Removing the AC plug adapter For Windows OS Checking the Drive in the System Locate the Safely Remove Hardware icon found in the taskbar Unplugging the MP-WDX2E Device Placing a Disc into the Drive Drive Basics Ejecting a Disc from the Drive Using the Emergency Manual Eject Bar Handling a Disc Using Compact DiscsCleaning a Disc Electrical and Audio Specifications Environmental SpecificationsAC Power Adapter ADP-15AH Technical Information Memo 0903KHY Idass