RAD Data comm ASMI-450 operation manual Init DB, Parameter Designation Default Value

ASMi-450 Control from the Control Port

INIT DB ----------------------------------------------------------------------------------------

Purpose		Load a specified set of default parameters values instead of the user configuration (Table
		4-3).
Format		INIT DB
Use		1. Type
		INIT DB<CR>
		2. The ASMi-450 will display the TIME and DATE fields followed by the ASMi-450
		prompt.
		Table 4-C. ASMi-450 Default Configuration Used with Control Terminal
	Parameter Type		Parameter Designation	Default Value
			PASSWORD	ASMI
			NODE (node number)	0
		General	CLEAR SCREEN	00000000
			CURSOR HOME	00000000
			CURSOR RIGHT	00000000
		System	CLK_MASTER	EXT
			ACTIVE TS	Maximum supported on the ASMi-450 model
			SPEED	AUTO
			DATA	8
			PARITY	NONE
			INT	DCE
		SP	PWD	NO
		(Control Port)	LOG_OFF	NO
			CTS	=RTS
			DSR	ON
			DCD_DEL	0_MSEC
			POP_ALM	NO
INIT F -------------------------------------------------------------------------------------------
Purpose		Resets the terminal control codes used to clear the terminal screen, to move the cursor to
		the right, and to return the cursor to the home position to 0.
Format		INIT F<CR>
& Use

ASMi-450 Installation and Operation Manual 4-23