RAD Data comm ASMI-450 operation manual Chapter Installation, General

Page 31

Chapter 2

Installation

2.1 General

The ASMi-450 is delivered completely assembled. It is designed for installation as a desk-top unit or for mounting in a 19" rack.

Mechanical and electrical installation procedures for the ASMi-450 are provided in the following paragraphs. For rack installation instructions, refer to Appendix C.

After installing the unit:

∙Refer to Chapter 3 for system configuration information and procedures using the front panel controls.

∙Refer to Chapter 4 for system configuration procedures using an ASCII terminal connected to the ASMi-450 control port.

In case a problem is encountered, refer to Chapter 5 for test and diagnostics instructions.

Warning

No internal settings, adjustment, maintenance, and repairs may be performed by either the operator or the user; such activities may be performed only by a skilled technician who is aware of the hazards involved.

Always observe standard safety precautions during installation, operation, and maintenance of this product.

ASMi-450 Installation and Operation Manual

2-1

Image 31

Contents ASMi-450 Warranty Hdsl SelvRegulatory Information Declaration of Conformity Page Contents ASMi-450 Control from the Control Port Appendix a Connector Wiring Contents List of Figures List of Figures Xii List of Tables List of Tables Xiv Preliminary Preparations Starting Procedure Starting the ConfigurationStep Action Use the Command Configuration ProcedureFunction Terminal Type TV920 VT52 VT100 Freedom 100/110 Type Configuration Display Commands Control Commands Command IndexQuick-Start Guide Functional Description Purpose and Main FeaturesTypical Application for ASMi-450 with Data Interface Hdsl Subsystem Characteristics Internal timing System TimingLocal Control Control ASMi-450 OperationRemote Management Introduction Power Requirements Test and Diagnostics CapabilitiesAlarms Physical CharacteristicsBinary Digits Quaternary Symbol Transmission Media Hdsl Line SignalOperating Environment Hdsl Signal Structure HDSL-Related System Functions Hdsl Interface Technical SpecificationsEthernet Interface Physical Characteristics General Chapter InstallationSite Requirements UnpackingGeneral ASMi-450 Configuration InformationOpening ASMi-450 Case Switch S1 Jumper and Switch Location FunctionsASMi-450 Internal Settings OFF Jumper R/C Internal Settings Procedure Reinstalling ASMi-450 CoverJumper FGND/GND Connector Location Grounding AC Power Connection Power Connection Users Port ConnectionsDC Power Connection Hdsl Line Connections Control Port Connection Scope Chapter Front-Panel Operating InstructionsControl or Indicator Function Front Panel Controls, Connectors, and IndicatorsIndicator Function IndicatorsEthernet Interface General General Operating Instructions Display Functions Control of ASMi-450 Operation, GeneralDisplay Description See Configuration ParametersStatus Messages Test FunctionsPush-buttons Using Front-PanelOrganization ASMi-450 DisplayFront-Panel Operating Instructions Designation Function Values System Configuration ParametersControl Port Configuration Parameters Operating Instructions Turn-on Checking Current Operating ConfigurationCursor DisplayScroll Ethernet Interface Indications Fault IndicationsStep Action Key Display Normal Front-Panel IndicationsProtection Local Configuration Set-Up ProcedurePassword Configuration ProcedureAlready there Scroll to display the desired group Alarm Buffer Specific Configuration GuidelinesSP Parameters LCD Configuration Error Messages Front-Panel Operating Instructions Chapter ASMi-450 Control from the Control Port Hardware Requirements Clear to Send CTS Interface TypeData Terminal Ready DTR Request to Send RTSRing Indication RI Autobaud FunctionData Set Ready DSR ASMi-450 Preparations Supervision Terminal Connections Internal SettingsControl Port Configuration Preparation for Use of Supervision TerminalOption Meaning Example of Usage Command Language Syntax Command OptionsCommand Protocol ASMi-450 Supervision LanguageIndex of Commands Command Purpose Options Format ASMi-450 Command Set DescriptionCLR ALM CLR LoopDate CLR TSTDEF Agent Display Fields DEF NameDEF PWD DEF NodePurpose Format Use DEF SPPWD DEF Term DEF SYSFunction Terminal Type VT-52 VT-100 Freedom-110 DSP ALMFormat Use Alarm No Alarm Syntax Meaning State Time Remote DB Remote AlarmRemote Signal Loss Quality AlarmConnected DSP HDR TSTDSP ST Line REM LAN notDisplay Format DSP ST PortPurpose Format Use Display Format Exit DSP ST SYSHelp Init DB Parameter Designation Default ValueLoop PasswordNode Time ResetStarting a Session Single ASMi-450 Control Session Ending a Control Session Configuration Error Messages ASMi-450 Control from the Control Port Status Indications and Messages Indicators DisplayON/OFF Message Description Corrective Actions AlarmASMi-450 Alarm Buffer Messages Cont’d Remote Alarm Remote Reverse Test Functions Test FunctionsOperating Instructions Loop REM REM PortActivating the Test Functions from a Control Terminal Power-Up Self-TestTrouble Symptoms Probable Cause Corrective Measures Troubleshooting InstructionsLAN Pin Designation Direction Function RS-530 DCE Connector and Adapter CablesRcea Pin Designation Direction Function 36/RS-449/422Rceb V.35 DCE Connector X.21 DCE Connector Pin Line Connected Connected to To Terminal Hdsl Line ConnectorRS-232 V.24 Control Port Connector Pin FunctionEthernet Interface Connector Appendix B Snmp Management General Snmp Principles Snmp EnvironmentSnmp Operations MIB Structure Management Information BaseMIBs Supported by the ASMi-450 Snmp Agent Management Domains Under Access Restriction Using Snmp CommunitiesSnmp Communities Read ASMi-450 CommunitiesAddress Class First Byte Address Range IP EnvironmentGeneral IP Environment IP Address StructureSnmp Management Snmp Traps Appendix C Installation in 19 Racks Figure C-1. Installation of Single Unit in 19 Rack Installation of Single UnitGeneral Preparations Installation of Two UnitsFastening the Two Units ASMi-450 To install the ferrite cores