Sony CPD-E100 manual Identifying parts and controls, Front, Rear

Identifying parts and controls

See the pages in parentheses for further details.

Front

MENU

RESET

MENU

RESET

1RESET button (page 12)

This button resets the adjustments to the factory settings.

2Control button (page 9)

The control button is used to display the menu and make adjustments to the monitor, including brightness and contrast adjustments.

31 (power) switch and indicator (pages 7, 13, 16)

This button turns the monitor on and off. The power indicator lights up in green when the monitor is turned on, and either flashes in green and orange, or lights up in orange when the monitor is in power saving mode.

Rear

AC IN

4AC IN connector (page 6)

This connector provides AC power to the monitor.

5Video input connector (HD15) (page 6)

This connector inputs RGB video signals (0.700 Vp-p,
							US
positive) and sync signals.
						5
		1	2	3	4
	6	7	8	9	10
		11 12		13 14		15
Pin No.	Signal
1	Red
2	Green
3	Blue
4	ID (Ground)
5	DDC Ground*
6	Red Ground
7	Green Ground
8	Blue Ground
9	DDC + 5V*
10	Ground
11	ID (Ground)
12	Bi-Directional Data (SDA)*
13	H. Sync
14	V. Sync
15	Data Clock (SCL)*

* DDC (Display Data Channel) is a standard of VESA.

5