Iiyama LM704UT user manual Customer Service, Cleaning, Optimum Picture for the OPQ Function

[On screen display]

OPQ Function

Enable

OPQ Function

Disable

OTHERS

ATTENTION FOR USING THE OPQ FUNCTION (=Optimize Picture Quality)

Due to the nature of the Diamondtron M2-CRT, misconvergence, misalignment of the aperture grille, picture shaking or burn-in of phosphors may happen when displaying a high-white picture for a long time while the OPQ function is active.

Turn OFF the OPQ function when displaying anything other than DVD or other moving pictures.

OPTIMUM PICTURE FOR THE OPQ FUNCTION

1. OPQ function: ON

n Moving picture (DVD / TV)

2. OPQ function: OFF

n Word processor and spreadsheet n Text and a like

NOTE Turn OFF the OPQ function when displaying the picture described in 2. because your eyes are fatigued while the OPQ function is active.

ENGLISH

CUSTOMER SERVICE

NOTE

n If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

CLEANING

WARNING

CAUTION

NOTE

nIf you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.

nFor safety reasons, turn off the power switch and unplug the monitor before you clean it.

nThe CRT screen is protected by an anti-reflection & anti-static coating. Do not scratch or rub the screen with a hard object, as this could damage the coating.

nNever use any of the following strong solvents. These will damage the cabinet and the CRT.

Thinner	Spray-type cleaner
Benzine	Wax
Abrasive cleaner	Acid or Alkaline solvent

CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

CRT It is recommended that a soft clean cloth be used to remove smudges (such as fingerprints) from the CRT.

FOR YOUR SAFETY 3