Setting Off Line Status
To set the LiveGateway Board's status to Off Line:
1.Open the LiveGateway server from the LiveGateway SNMP Manager window.
2.Select the Gateway Boards tab of the LiveGateway Server window.
3.Perform one of the following actions:
•Click on a board in the list to highlight the board, and select
•
Performing a Self Test
To perform a Power On
1.Open the LiveGateway server from the LiveGateway SNMP Manager window.
2.Select the Gateway Boards tab of the LiveGateway Server window.
3.Perform one of the following actions:
•Click on a board in the list to highlight the board, and select
•
4.After the test completes successfully, the status of the LiveGateway board changes to Download and then to On Line or Off Line under the Status column heading of the LiveGateway Boards tab.
If the test is not successful, the status displayed is "Failed." To view the Power On Self Test (POST) result, refer to "Viewing the POST Result" section of this document. POST result information is useful when you test LiveGateway and you need to report problems to your PictureTel service provider
Testing and Resetting the Board
If the status displayed for a LiveGateway Board is "Failed", perform a