Using the Menu bar
The menu bar for the LiveGateway Server window lists the following selections:
Menu Bar Selection
File
View
Operations
Help
Description
1.Choose "Save Window Layout" to save the window size, current tab selection, and column widths.
2.Choose "Close" to close the LiveGateway Server window.
Note: File menu bar options are the same for both tabs.
1.Choose "Refresh" to read and refresh the data displayed in the window and any other windows that were opened from this window.
Note: View menu bar options are the same for both tabs.
For the Gateway Boards tab:
1.Choose "On Line." to place the LiveGateway board on line.
2.Choose "Off Line..." to place the LiveGateway board off line.
3.Choose "Self Test" to perform a Power On Self Test of the LiveGateway board.
4.Choose "Configure..." to reconfigure your ISDN BRI. Normally the ISDN BRI is configured once when LiveGateway is installed. However, if your ISDN switch is changed, you can reconfigure the ISDN BRI from the LiveGateway Server window.
5.Choose "Loop Back..." to perform a Loop Back test on the LiveGateway board.
6.Choose Show POST Result..." to show the POST (Power On Self Test) result for the LiveGateway board.
7.Choose "Show Statistics..." to display statistics for the LiveGateway board.
Selections that appear "dimmed (grey)" aren't available. For example, if the LiveGateway board is currently "on line", the "On Line" selection will appear dimmed since it is already selected.
For the Settings tab:
1.Choose "Save Changes" to save any changes that you made to the Gatekeeper name or address.
For the Gateway Boards tab:
1.Choose "Help" to display the online help for the Gateway Boards tab. For the Settings tab: