7. Programmable Features
7.4Direct commands for programming features
You can also select the desired setting by directly entering the program code (# and a
For more details on the features, see page 49 to page 51.
1Press {MENU}.
2Press {#} and the
3Press the desired direct command to display the desired setting.
L This step may be slightly different depending on the feature.
4Press {SET}.
5To exit programming, press {MENU}.
7.4.1Program code and direct command button
{#}{0}{0} Quick Setup
–{1}: “FAX ONLY” (default)
–{2}: “DIST. RING”
–{3}: “EXT. TAM”
–{4}: “TEL ONLY”
LPress {SET} before pressing the direct command button.
{#}{0}{1} Date and time
LEnter the date and time using the dial keypad. See page 28 for details.
{#}{0}{2} Your logo
LEnter your logo using the dial keypad. See page 29 for details.
{#}{0}{3} Your fax number
LEnter your fax number using the dial keypad. See page 30 for details.
{#}{0}{4} Sending report
–{1}:“ON”
–{2}:“OFF”
–{3}:“ERROR” (default)
{#}{0}{6} FAX ring count
–{1}:“1”
–{2}:“2”
–{3}:“3” (default)
–{4}:“4”
–{5}:“5 EXT.TAM”
{#}{1}{2} Remote activation ID
–{1}:“ON”
–{2}:“OFF” (default)
LIf you select “ON”, then enter your ID from 1 to 5 digits using
{#}{1}{3} Dialing mode
–{1}:“PULSE”
–{2}:“TONE” (default)
{#}{1}{6} Paper size
–{1}:“LETTER” (default)
–{2}:“A4”
–{3}:“LEGAL”
{#}{1}{7} Ringer pattern
–{1}:“A” (default)
–{2}:“B”
–{3}:“C”
{#}{2}{2} Automatic journal report
–{1}:“ON” (default)
–{2}:“OFF”
{#}{2}{3} Overseas mode
–{1}:“NEXT FAX”
–{2}:“OFF”
–{3}:“ERROR” (default)
{#}{2}{5} Delayed send
–{1}:“ON”
–{2}:“OFF” (default)
LIf you select “ON”, next enter the fax number and transmission time using the dial keypad (see feature #25 on page 50 for details).
{#}{2}{6} Automatic Caller ID list
–{1}:“ON” (default)
–{2}:“OFF”
{#}{3}{1} Distinctive Ring
–{1}:“ON”
–{2}:“OFF” (default)
{#}{3}{2} Fax ring pattern
–{1}:“A”
–{2}:“B”
–{3}:“C”
–{4}:“D”
–
{#}{3}{7} Auto reduction
–{1}:“ON” (default)
–{2}:“OFF”
{#}{3}{9} Display contrast
– {1}:“NORMAL” (default)
52