Panasonic DA-PC700 manual Print/Scan Mode Settings, Configuring by the Tools Mode Screen 187

13.2 System/Meter Settings

13.2.3Print/Scan Mode Settings

Menu Item			Description
Screen Layout	See "2.6 Custom Presets for Scanning Features" of the Operating Instructions (For
	Scanner).
Feature Defaults	See "2.6 Custom Presets for Scanning Features" of the Operating Instructions (For
	Scanner).
Network Settings	Items:
	¥	Ethernet Board Setting
		Sets the Ethernet interface type.
		Available options: 10BT/100BTX AUTO*, 100Base-TX, 10Base-T.
	¥	TCP/IP: IP Address
		Select whether to obtain the necessary information (IP address, subnet mask,
		gateway address) for using the TCP/IP protocol from the DHCP server
		automatically or manually. Check with the network system administrator for the
		value to specify.
		Displayed as "aaa.bbb.ccc.ddd" where aaa, bbb, ccc, ddd are each a 3-digit
		value of 000 - 255. However, "aaa" cannot be 127 or any number from 224-255.
		Available options: Auto Obtain (DHCP), Auto Obtain (BOOTP), Specify
		Address.
			The IP address can be set when any of the interface cards (TCP/IP of
			LPD, SMB, Salutation, FTP Client, Agent: Start UDP, Internet Service)
			using TCP/IP is activated.
			• When a wrong IP address is set, the whole network might be
			adversely affected.
			• This machine does not support Classless Inter Domain Routing
			(CIDR). Hence, even if the subnet mask is set to
			"255.255.240.0", it will still activate as "255.255.255.0".
	¥	TCP/IP: Subnet Mask
		Sets the necessary subnet mask for using the TCP/IP protocol.
		Displayed as "aaa.bbb.ccc.ddd" where aaa, bbb, ccc, ddd are each one of the
		following values: 000, 128, 192, 224, 240, 248, 252, 254, 255. However, the bits in the
		middle cannot be set to 0. Check with the network system administrator for the
		value to specify.
			This machine does not support Classless Inter Domain Routing
			(CIDR). Hence, even if the subnet mask is set to
			"255.255.240.0", it will still activate as "255.255.255.0".
	¥	TCP/IP: Gateway Address
		Sets the necessary gateway address for using the TCP/IP protocol.
		Displayed as "aaa.bbb.ccc.ddd" where aaa, bbb, ccc, ddd are each a 3-digit
		value of 000 - 255. However, "aaa" cannot be 127 or any number from 224-255.
		Check with the network system administrator for the value to specify. Define
		this setting only when it is necessary to set the gateway address. In
		environments where the gateway address can be set dynamically, there is no
		need to define the setting.
			* factory setting

13

Configuring by the Tools Mode Screen

187