8.2Setup for NetWare
This section describes the flow of setup the printer in a network environment running NetWare.
8.2.1Flow of Setup
Setting up the printer
Set the NetWare interface port to Enable (factory setting: Disable) and activate the protocol to be used from the printer control panel. Print the printer settings list and check the device name (Host Interface Setup>NetWare>Device).
"8.3 Setup for the Printer"
Setting the NetWare print service
Using PCONSOLE or NetWareAdministrator (NWADMIN), create print queue, print server and printer and assign the respective objects.
¥ When using in the PSERVER mode, use the device name checked in Step for the print server name. Set Printer Location as Auto Load (Local).
•For information on how to use PCONSOLE or NWADMIN, see the manual which comes with NetWare. For NetWare 5.X, only NWADMIN is available for use.
Setting up the client
Install a printer driver compatible with the printer to a PC. Different printer drivers are used for different operating systems.
Use a PC that is functioning properly as a client of NetWare.
"8.4 Setup for the Client"