Panasonic DA-PC700 manual Printer is not Printing, 218, Cause Verification Action

15.4Using NetWare

This section provides information on the possible causes, verifying methods and recommended actions pertaining to errors which may occur when using the printer with NetWare.

15.4.1 The printer is not Printing

Cause	Verification				Action
The network component is not	Check if the data link lamp of the	From the printer, set up the frame
compatible with the auto setup	network component board	type specified to the file server
of the frame type.	connected to the printer is on.	which you want to connect.
	Check if the frame type of file
	server in the network is similar.
There is a breakdown in the	Using NWADMIN from the	Switch the network cable between
network from the workstation	workstation, check if the target	the workstation and printer that
to the printer.	printer object can be seen.*	cannot be used for transmitting.
The user name and group name	Using NWADMIN from the	1. Re-send the print jobs to a print
are not registered in User of the	workstation, and referring to the		queue which is correctly
print queue.	target queue object, check if the		registered with the user name or
	user name and group name are		group name at User of Print
	registered in User*.		Queue Information.
		2. Using NWADMIN from the
			workstation, register the user
			name and group name at User
			of Print Queue Information.*
Jobs cannot be sent to the print	Using PCONSOLE, check if Yes is	Using PCONSOLE, set it to Yes.
queue.	set up for "User can register with
	the queue" at the Current Queue
	Status of Print Queue Information.
Jobs cannot be sent to the print	Using NWADMIN from the	Using NWADMIN from the
queue.	workstation, check if the operator	workstation, check if each item of
	flag is checked by Recognition of	the operator flag is checked by
	the target print queue.*	Recognition of the target print
		queue. *
The user name and group name	Using NWADMIN from the	1. Re-send the print jobs to a print
are not registered in the print	workstation, check if the user		queue which is correctly
server user of the print server.	name and group name are		registered with the user name or
	registered with the User of the		group name at User of Print
	target print server.*		Server Information.
		2. Using NWADMIN from the
				workstation, register the user
				name and group name at User
				of the target print server.*

218