Panasonic DA-PC700 manual Troubleshooting 211, Tray will result in paper

		15.1 When Problems Occur
Condition	Cause	Treatment
Output without stapling/	Is the paper in the paper tray of the	When issuing double stapling
punching despite stapling/	same size and orientation as that	(left/right/top) instruction to B5/
punching instructions from	specified at the client?	A4/8.5 x 11" paper, the print job
the client.		might be output without stapling/
		punching. When this happens,
		change the paper to a different
		orientation and from the Tools
		Mode screen, change the paper
		size.
	Has stapling/punching instructions	Documents of mixed sizes cannot
	been issued to documents of mixed	be stapled/punched.
	sizes?
	Has stapling instructions been	Only 2-50 pages of paper can be
	issued to more than 50 pages of	stapled.
	paper?
	Has stapling instructions been
	issued to just 1 page of paper.
After paper of the wrong	Have the paper size been specified	When paper of a different size have
sizes in the paper tray have	by the Tools Mode screen?	been set in the paper tray, always
been replaced with the		specify the paper size by the Tools
correct one, any printing		Mode screen.
specified to be output from		Operating Instructions (For
the tray will result in paper
		Copier)
jam. Or the message "Put in
XX-sized paper" is
displayed.

When printing has not been correctly processed, the information will be saved in Job History Report.

When printing has not been processed, make use of the Job History feature to check the print processing condition. Print data that cannot be correctly processed might be discarded.

"12.2 How to Print Report/List" for details on how to print the Job History.

15

Troubleshooting

211