Panasonic DA-PC700 manual 134, Ipp Dns

Page 148

9.1 Introduction

9.1.3Other Setting Items

If necessary, define the following items related to IPP on the Internet Services screen (Properties tab > Protocol settings > IPP). However, there is no need to change the factory setting of these items for normal usage.

¥	IPP Port Number	(Factory setting: 80)
¥	IPP Print Mode	(Factory setting: PCL*)
¥	IPP PJL Switch	(Factory setting: On)
¥	IPP TBCP Filter	(Factory setting: Disable)
¥	IPP Access Control	(Factory setting: Disable)
¥	IPP DNS	(Factory setting: Disable)
¥	IPP Connection Time-Out	(Factory setting: 60 sec)
¥	IPP Spool	(Factory setting: Hard Disk spool)

• These settings cannot be defined at the printer touch panel display.

•* If the optional PS3 (PostScript software) kit is installed, factory setting will be Auto.

•Port Number is the port number used for receiving data. It is fixed at 631 and for additional port, you can define the number as 80 or between 8000-9999. If you assign 0 as the port number, the added port will not be enabled. This setting is effective after the printer is rebooted.

•With IPP, you can store the print data output from the application in the spool file of the printer temporarily to be processed for printing. Set the spool mode by using the IPP spool of the receive buffer capacity.

Spool mode:

The mode which stores print data output from the application in the spool file of the printer temporarily to be processed for printing. You can choose to save the spool file in either the RAM disk which has used the printer memory or the hard disk connected to the printer. As the processing of print data after spooling will be done in the printer, the application in the client is released sooner. Requests from multiple clients can be processed at the same time.

Non spool mode:

The mode which processes printing while the print data output from the application is being received by the printer. When the printer is processing printing request from a client, printing request from other clients cannot be received.

•The maximum spool number is 1,000. However, depending on the empty capacity, you may spool up to 200 only.

For non spool mode, if a job is sent when the printer is in sleep mode, the buffer may become full and the printing request may not be completed. When this happens, deactivate the sleep mode of the printer and the printing request will be completed.

134

Image 148

Contents DA-PC700 TRADEMARKS/COPYRIGHTS Preface Manual bundled with the main unit i.e. the copier Types of ManualsManuals bundled with the Printer/Scanner Unit Organization Using These Operating InstructionsIii Using Internet Services Setting Print ModeConfiguring by the Tools Mode Screen Precautions and LimitationsConventions Icons used in this manualBold face All kinds of buttons e.g. Click OKSafety Notes Precaution for power and earth connectionTable of Contents Setup for the Direct Print Utility Chapter Installing/ Configuring the Printer DriversViii Setup for Windows Networking Chapter Setup for TCP/IP Windows NT/WindowsSetup for NetWare Chapter Using the Internet Printing Protocol Using Internet ServicesSetting Print Mode Chapter Printing Reports/ListsPrecautions and Limitations Configuring by the Tools Mode ScreenChapter Troubleshooting Xii AppendixOverview of the Printer Parallel interface connector Ethernet interface connectorMain Components and Their Functions Back ViewUsing the Touch Panel Display Overview of the PrinterGetting Ready to Print Connect the cable and make the necessary set- tingsWhen connecting to a network Special Features Printer Setting Printer Environment Network Printer Environments TCP/IP Direct Print Utility for Windows 95/98/Me TCP/IP for Windows NT 4.0/Windows AppleTalk for Macintosh NetWareInternet printing Token RingFlow of Setting Setting IP Address for Network EnvironmentSetting method Using Touch Panel Display for Setting Setting IP address/subnet mask/gateway addressProcedure Select Print/Scan Mode SettingsSelect Network Settings Select Specify AddressMachine will be rebooted Touch Exit ToolsChecking/Setting Dhcp Environment Setting Port Activating PortSelect Port Status and then touch Change Settings Select Print/Scan Mode Settings Select Port SettingsSelect LPD Select Enable Select Save Select Close twiceOther setting items Select Exit ToolsUsing the Power Saver Mode Power SaverAutomatic Power Saver Mode About the Attached CD-ROMThis page is intentionally left blank Setup Connecting Interface Cables ParallelEthernet SetupEthernet interface supports the following types of cable Uses Memory AllocationSuggested Values Useful Operations Flow of Printing For WindowsOnline Help Basic Way of PrintingUseful Operations Check the contents and touch Exit Checking Job StatusCancelling Printing From Printer Cancelling Jobs in ProcessCancelling Jobs in the Printer Forced Outputting Outputting Waiting JobsOutputting in Emulation Mode Switching Printer to Offline Select Print ModePrinting vs Copying Scanning This page is intentionally left blank This page is intentionally left blank This page is intentionally left blank This page is intentionally left blank Installing Configuring Printer Drivers Installation/Configuration Methods Settings on the PrinterSelect Print/Scan Mode Setting About the Printer DriversInstalling/Configuring the Printer Drivers Installing/Uninstalling Printer DriversFor a Local Printer Installing/Uninstalling the Printer Drivers For Windows 95/98/Me For a Network Printer Click Add Network PortUninstalling the Printer Drivers Installing/Uninstalling the Printer Drivers Accessing the Printer Properties Dialog Box Configuring the Printer DriversFor Windows 95/98/Me Accessing the printer properties dialog box For Windows NT 4.0/WindowsSetting the Printer Properties Paper Source Options PrinterPaper Output Options Error Report Job Owner SettingsAuto Configuration Restore DefaultsPaper/Output Job TypePaper Size Paper SourceOutput Destination Paper sizes available for each paper source are as followsCopies default Image OrientationSided Print Custom Paper SizeOutput Options Collate SettingsFinishing Apply one staple at the top-right corner of paper Apply two staples at the left edge of paperApply two staples at the right edge of paper Apply one staple at the bottom-left corner of paperPunch Position EMF Spooling for Windows NT 4.0/Windows 2000 default off First SheetGraphics Graphics ModeHalftone Image Enhancement default on All Texts to Black default offTrueType Mode Use Printer TrueType Fonts default onHalftone Color Adjustment for Windows NT 4.0/Windows OverlaysLoad Overlay Create OverlayDelete Overlay Delete AllQuery Page Overlay Selected Overlay statusLayout Mode Multi-Upavailable when Multi-Upis selected for Layout ModeLayout No page border is drawnBooklet Creation Zoom available when Zoom is selected for Layout Mode Top Left Top Right Center default Bottom Left Bottom RightNone default Poster available when Poster is selected for Layout ModeShadow CustomProcedure to create a watermark is as follows Procedure to edit a watermark is as followsProcedure to delete a watermark is as follows WatermarksTo print a watermark, the options available include BackgroundThis page is intentionally left blank Setup for Direct Print Utility Using the Direct Print Utility System ConfigurationTarget Computers Windows 95/98/Me Target computers must meet all the following requirementsFlow of Setup Setup for the Direct Print UtilitySetup of the Printer When the LPD Port is DisabledSetup of the Printer Other Settings Installing the Direct Print Utility OverviewSetting the TCP/IP Protocol Installation Procedure Procedure to install the Direct Print Utility is as followsRestart the system for the installation to complete Setting the Port Click the Details tab Click Add PortEnter a name for identifying the printer Port NameIP Address Status Indication Status Indication Uninstalling Uninstalling This page is intentionally left blank TCP/IP Setup for TCP/IP Windows NT/Windows Setting the LPD Port to Enable Setup for the PrinterWindows NT/Windows Setup for TCP/IP 2000 Setup for the Printer Windows NT/Windows Setup for TCP/IP 2000 Select Exit Tools Other Settings For Windows NT 4.0/Windows Setup for Windows NT100 Setup for Windows Networking System Structure Introduction102 103 Setup for Windows Networking Setup ProcedureInstall the printer driver to the host computer Activating Port and Setting Protocol Setting NetBEUI in Printer104 105 Setup for Windows Networking Select SMB106 107 Setup for Windows Networking Defining IP Address Setting TCP/IP in Printer108 109 Setup for Windows Networking Refer to 7.2.2 Other Settings 110Changing Printer Workgroup Name 111 Setup for Windows NetworkingThrough Windows Networking 112 Close message.txt113 Setting format of config.txtActivation of NetBEUI protocol On/Off 114 Activation of Dhcp On/Off Wins Dhcp Resolve115 Setup for Windows Networking Example of config.txtPreparation for Auto Driver Downloading Auto Driver Downloading116 117 Setup for Windows Networking Auto Downloading of Printer Driver 118119 Setup for Windows Networking 120 Setup for NetWare Using NetWare Target Computers122 Target computers must meet the following requirementsSetup for NetWare 123 InterfacePrinter supports the following types of Ethernet interface Following frame types are supportedSetup for NetWare 124Setup for NetWare 125 Setting the Port to EnableActivate the NetWare¨ port by the following procedure 126 Select NetWareSetup for NetWare 127 Printing the Printer Settings List 128Setup for NetWare 129 Setup for the ClientWindows 95/98/Me, Windows NT 4.0 or Windows This page is intentionally left blank Using Internet Printing Protocol 132 System EnvironmentEssential system environment is as follows Using the Internet Printing Protocol 133 Define the IP address134 IPP DNSSetup of the Printer Installing the Printer Driver Using the Internet Printing Protocol 135136 Using the Internet Printing Protocol 137 Click Have DiskManufacturers files from, and then click OK Screen to select the printer driver appears138 Using Internet Services Structure of the Internet Services Screen Using Internet Services140 Using Internet Services 141 Target Host Computers and BrowsersHost computers BrowsersConfiguring Browser Checking Browsers142 For Netscape CommunicatorUsing Internet Services 143 Proxy server settingPort number setting Checking Proxy Server and Port NumberActivating Internet Service Configuring Printer144 Using Internet Services Select Port Settings Select Internet ServiceWith Port Status selected, touch Change Settings Select Enable and then touch Save146 Other Internet Service Settings ItemsSelect Close twice until the screen at is displayed Activating Browser Using Internet Services 147Activating Browser Help Screen of the Internet Services is displayed148 Setting Print Mode Print Mode Operation 150PCL 6 Settings List of PCL 6 Settings ItemsSetting Print Mode 151 Menu Item Description152 Setting Print Mode 153 154 ISO-6 ISO 6 AsciiSetting Print Mode 155 Spaced font is selectedSetting Procedure Select Print Mode from the menu screenTouch PCL6 Settings 156Setting Print Mode 157 This page is intentionally left blank Printing Reports/Lists Types of Reports/Lists Types and Paper Sizes160 TypesPrinter Settings List About Printer Settings ListPrinting Reports/Lists 161 Printing result162 Printing Reports/Lists 163 Job History ReportAbout Job History Report 164 ERRPrinting Reports/Lists 165 Error History Report About Error History ReportPrints information related to printer errors 166Printing Reports/Lists 167 PCL Settings List About PCL SettingsPrints the PCL settings of the printer 168Printing Reports/Lists 169 170 PCL Fonts ListAbout PCL Fonts List Printing Reports/Lists 171 172 PostScript Fonts ListAbout PostScript Fonts List Printing Reports/Lists 173 174 Print Meter ReportAbout Print Meter Report Printing Reports/Lists 175 About PostScript Settings List PostScript Settings List176 Printing Reports/Lists 177 Stored Print Job List 178About Stored Print Job List Following items will be included in the list Mailbox SizePrinting Reports/Lists 179 180 How to Print Report/ListSelect Print Report/List Configuring By the Tools Mode Screen Displaying the Tools Mode Screen Tools Mode182 Exiting the Tools Mode Screen Configuring by the Tools Mode ScreenSelect Exit Tools on the Tools Mode screen 183Common Settings System/Meter Settings184 Configuring by the Tools Mode Screen 185 Copy Mode Settings 186Print/Scan Mode Settings Configuring by the Tools Mode Screen 187188 Input no more than 12 characters from A-Z, 0-9 and spaceConfiguring by the Tools Mode Screen 189 190 SMBConfiguring by the Tools Mode Screen 191 Connected to any other salutation protocol192 IPPConfiguring by the Tools Mode Screen 193 194 Configuring by the Tools Mode Screen 195 Select Enable Select Save 196Precautions Limitations When switching on/off power When cancelling printingWhen initialized hard disk GeneralPrecautions and Limitations 199 When using the finisher with the puncher attachedSetting Printer On Using NetWare200 Setting Server Precautions and Limitations 201For NDS For BinderyUsing Token Ring Interface Port During PrintingOthers 202On Using TCP/IP LPD During SetupDuring Switching Power On/Off Precautions and Limitations 203When LPD Spool is set to Off non-spool mode When LPD Spool is set to Hard Disk or Memory spool modeWhen the IP address or computer name is changed Take note of the following when printingPrecautions and Limitations On Using SMB205 When SMB Spool is set to Hard Disk or Memory spool mode When printer is in offline mode206 Deleting jobsTroubleshooting When Problems Occur Exit the Tools Mode screen208 Condition Cause TreatmentTroubleshooting 209 Raster for Graphics Mode. Or 210Stop Tray will result in paper Troubleshooting 211Jam. Or the message Put XX-sized paper is Displayed When the Print Quality is Poor 212Troubleshooting 213 Paper used is not suitable Replace with suitable paper214 Troubleshooting 215 Paper has moisture Replace with new paperUnable to print Network Error 216Troubleshooting 217 Following port . Click Spool Settings to display its218 Printer is not PrintingCause Verification Action Troubleshooting 219 220 Set NCP Packet Signature Option=X X 0, 1 orTroubleshooting 221 When Switch Off the Power AppearsUnable to Obtain Desired Print Results No Notification 222When Using Windows 95/98/Me Using TCP/IPTroubleshooting 223 When Using Windows NT When the printer is not printing224 Unable to obtain the desired print resultsTroubleshooting 225 Using SMBPrinter is not Found Cannot Delete Documents from the Printer Window Cannot Print226 Troubleshooting 227 Cannot Perform Auto Driver Downloading228 Appendix Specifications of the Printer Main Specifications230 Printing Area Appendix 231Connectors and Allocation Signal Shape of the connector232 Pin arrangementAll connections adhere to the Ieee 1284 connector standard Meaning of the signalsAppendix 233 Using Overlays Printing Data CombinedCreating an Overlay 234Appendix 235 Printing with an OverlayNext, print your data with the overlay Printing Secured Print Sample Set Jobs236 Secured PrintStoring Secured Print/Sample Set Jobs Appendix 237Printing Secured Print/Sample Set Jobs 238Appendix 239 240 Following screen appears For Secured Print jobGlossary Glossary241 242 Symbol IndexIndex 243244 Index245 This page is intentionally left blank Memo Warranty

Related manuals

Manual 65 pages 24.1 Kb