Panasonic DA-PC700 manual 192, Ipp

13.2 System/Meter Settings

Menu Item		Description
Port Settings >	Items:
IPP	¥	Port Status
		Define the setting of the IPP port when the power is on.
		Available options: Disable*, Enable.
		The note items at the end of this tabulation of print/mode settings.
	¥	Print Mode
		Sets the print mode.
		Available option: Auto*, PCL, PostScript.
	¥	PJL Switch
		Sets the PJL commands sent from the host device to valid or invalid.
		Available options: Off, On*.
	¥	TBCP Filter
		Define the setting of the TBCP Filter when the optional PostScript software kit
		is installed.
		Available options: Disable*, Enable.
	¥	Access Control
		Available options: Disable*, Enable.
	¥	DNS
		Available options: Disable*, Enable.
	¥	Add Port Number
		Available options: 80, 0, 8,000 - 8,999 (in increments of 1 unit)
	¥ Connection Time-Out
		Available options: 0 - 65,535 sec (in increments of 1 sec)
Memory Changes	Items:
	¥	Parallel Receive Buffer
	¥	NetWare Receive Buffer
	¥	AppleTalk Receive Buffer
		Sets the memory capacity of the receive buffer for the respective interfaces.
		Receive buffer is the temporary storage location of the data sent from the PC.
		The memory capacity of the buffer can be changed according to the status and
		objective of the usage. The increase of memory capacity for the buffer can
		speed up the release of the host device of each interface.
		Available memory capacity: 64 KB - 1024 KB in increments of 32 KB (256 KB*).
		The maximum memory capacity may change according to the free memory
		space.
	¥	LPD Spool
	¥	SMB Spool
		Sets the memory capacity of the LPD Spool and SMB Spool.
		There are three parts of the LPD Spool and SMB Spool:
		(1) Off (non-spool mode)
		During LPD processing from a PC, data from other PCs cannot be received.
		There is a receive buffer meant for LPD use.
		Available memory capacity: 64 KB - 1024 KB in increments of 32 KB (256 KB*).
		The maximum memory capacity may change according to the free memory
		space.
		* factory setting

192