3.6Printing vs Copying/
Scanning
The touch panel display will be as follows during printing or transmission.
When Exit is selected on the screen displayed, the next copying/scanning operation can be programmed ahead without disrupting the current printing operations.
The following table explains about the relationship between the printing function and the copying/ scanning function.
Control Panel Operations | Printer Actions |
|
|
Defining the copy/scan settings | Cannot print but can receive printing instructions from |
| computers. |
| After a certain time has passed after the settings, the |
| document sent by the computer will be printed. |
| During copying/scanning, printing cannot be done. After |
| these jobs are completed, documents sent by the computer |
| will be printed in the order received. |
|
|
Select Exit during printing | Copying/scanning operations can be programmed ahead |
| without disrupting the current printing operation. |
|
|
Press Interrupt during printing | Printing will be stopped temporarily and the copy/scan |
| functions can be used. However, printing instructions can be |
| received from the computers. When Interrupt is pressed again |
| to exit the interrupt mode, printing will restart. Even during the |
| interrupt mode, the print processing will start if no operations |
| are carried out after a certain time*. Documents sent by the |
| computer will be printed according to the order received. |
|
|
*: This time setting is done from the Tools Mode screen. See "Chapter 13 Configuring by the Tools Mode Screen" for details on the setting method.
38