Using your handset
Keypad tones
The handset is preset to have no keypad tones. You can set it to loud or soft tones.
1Press OK then 5.
JK | |
5 | L |
2Use the ▲ button to increase the volume. The display will show 2 dashes or one or two blocks.
3Use the ▼ button to decrease the volume or switch the tones off.
4Press OK to confirm your choice.
Call timer
After you have finished a call you can check the length of the call.
To check the duration of a call
1When you have finished a call, press the Clr button. The display shows the length of the call in hours, minutes and seconds. The display will return to normal after a few seconds.
2To clear the call duration, press the Clr button again while the call duration is being shown. The display will return to 00 00 00.
32