Samsung Essential Setup and Features for the CLX-3185FW and CLX 3185WK Printers
Page 104

Option

Description

 

 

Scan Setup

Restores all of the scan options to the factory

 

default.

System Setup

Restores all of the system options to the factory

 

default.

Network Setup

Restores all of the network options to the factory

 

default.

Address Book

Clears all of the fax numbers entries stored in

 

memory.

Sent Report

Clears all records of sent faxes.

Fax RCV Report

Clears all records of received faxes.

 

 

Network (CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185 FW only)

You may set up the network with the machine's display screen. Before doing that, you must have the relevant information concerning the type of network protocols and computer system you use. If you are not sure which setting to use, contact your network administrator to configure this machine to the network.

1.Press Menu on the control panel.

2.Press the left/right arrow until Network appears and press OK.

3.Press the left/right arrow until the setup option you want appears and press OK.

4.Press the left/right arrow until the setting you want appears and press OK.

5.Repeat steps 3 through 4, as needed.

6.Press Stop/Clear to return to ready mode.

Option

Description

 

 

TCP/IP

Select appropriate protocol and configure

 

parameters to use the network environment.

 

There are lots of parameters to be set. If

 

you are not sure, leave as is, or consult the

 

network administrator.

TCP/IP (IPv6)

Selects this option to use the network

 

environment through IPv6 (See "IPv6

 

Configuration" on page 6).

Ethernet Speed

Configure the network transmission speed.

Wireless

Selects this option to use the wireless network

 

(See "Wireless network setup

 

(CLX-3185FW/CLX-3185WK only)" on page 1).

Clear Setting

Reverts the network settings to the default

 

values.

Network Info.

This list shows information on your machine’s

 

network connection and configuration.

 

 

Menu overview

The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing Menu.

Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.

Items

Option

 

 

Fax Featureb

Darkness

 

Resolution

 

Scan Size

 

Multi Send

 

Delay Send

 

Priority Send

 

Forward

 

Secure Receive

 

Add Page

 

Cancel Job

Fax Setupb

Sending

 

Redial Times

 

Redial Term

 

Prefix Dial

 

ECM Mode

 

Send Report

 

Image TCR

 

Receiving

 

Receive Mode

 

Ring To Answer

 

Stamp RCV Name

 

RCV Start Code

 

Auto Reduction

 

Discard Size

 

Junk Fax Setup

 

DRPD Mode

 

Change Default

 

Resolution

 

Darkness

 

Scan Size

 

Auto Report

Copy Feature

Scan Size

 

Reduce/Enlarge

 

Darkness

 

Original Type

 

Layout

 

Adjust Bkgd.

 

Gray Enhance

 

Eco Copy

 

 

Machine status and advanced feature_ 4

Page 103 Page 105
Image 104
Page 103 Page 105
Contents Multi-Functional Printer Contents Completing the Installation Troubleshooting Using the save modesSetting the default paper Setting job timeout Setting the humidity modeUsing Samsung Scan and Fax Manager Preparing to fax Using a fax in your computerAdjusting the document settings Setting up Address BookUsing the Smart Panel program Using the Linux Unified Driver ConfiguratorMaintenance parts Solving other problemsCopyright CopyrightSafety information Important safety symbolsSafety information Operating environmentOperating method Installation / Moving Maintenance / CheckingSupply usage Laser Safety Statement Ozone SafetyRegulatory information Regulatory informationRecycling Mercury SafetyPower Saver Correct disposal of batteries in this product Taiwan only Radio Frequency EmissionsFCC Information to the User Canadian Radio Interference RegulationsFederal Communications Commission FCC FCC Statement for Wireless LAN useRussia only Germany only Turkey only You should also know that Fax BrandingRinger Equivalence Number Replacing the Fitted Plug for UK Only Declaration of Conformity European CountriesImportant warning Approvals and CertificationsEuropean States qualified under wireless approvals EC CertificationOpenSSL License Wireless GuidanceRegulatory Compliance Statements Original SSLeay License China only Regulatory information About this user’s guide ConventionAbout this user’s guide Convention Description ExampleFinding more information Material name DescriptionSamsung website DownloadableFeatures of your new product Features of your new productSpecial Features Features by Models Introduction Machine overview CLX-3185/CLX-3185N/CLX-3185WKFront view IntroductionRear view Control panel overview CLX-3185/CLX-3185N/CLX-3185WK Machine overview CLX-3185FN/CLX-3185FW Rear view Control panel overview CLX-3185FN/CLX-3185FW WPS CLX-3185FW Scan/EmailDirect USB CLX-3185FN Understanding the Status LED Introducing the useful buttonsAcknowledging the status of the toner cartridge WPS button CLX-3185WK/CLX-3185FW onlySetting up the hardware Getting startedSupplied software Getting startedMacintosh System requirementsMicrosoft Windows Installing USB connected machine’s driver LinuxWindows RequirementsInstalling the Unified Linux Driver Installing the SmartPanel Installing the Printer Settings UtilitySetting up a host computer Sharing your machine locallySetting up a client computer Select All programs Accessories Windows ExplorerDevices and Printers Check the Share this printerIntroducing useful network programs Using a wired networkNetwork environment Printing a network configuration report Setting IP addressIPv4 setting using control panel Windows IPv4 setting using SetIP Program WindowsRestoring factory default settings Installing wired network-connected machine’s driverNetwork parameter setting Search again Direct InputHelp Snmp Community NameInstall Linux Driver and add network Printer Open the Applications folder Utilities Print Setup UtilityHSelect Uninstall and click Uninstall Click Add on the Printer ListIPv6 Configuration Setting IPv6 addressesUsing SyncThru Web Service Activating IPv6Wireless network setup clx-3185fw/clx-3185wk only Using a wireless networkInstalling a wireless network with cables Changing WPS modeSetting a wireless network in PBC mode Items to prepareSetting a wireless network with USB cable Setting a wireless network in PIN modeWireless Network Setting Complete window appears Case of WPAFor the Dhcp method For the Static methodInstalling the machine on an Ad-Hoc wireless network Windows Creating the Ad-Hoc network in WindowsCreating the infrastructure network in Macintosh Creating the Ad-Hoc network in Macintosh Click Continue on the Read Me windowPreparing items Setting a wireless network with network cableIP setting using SetIP Program Windows Using SyncThru Web Service Configuring the machine’s wireless networkIP setting using SetIP Program Macintosh Troubleshooting Resetting factory default valuesCompleting the Installation Solving other problems Basic setup Altitude adjustmentSetting the date and time CLX-3185FN/CLX-3185FW only Changing the clock mode CLX-3185FN/CLX-3185FW onlyChanging the default mode CLX-3185FN/CLX-3185FW only Setting soundsUsing the save modes Setting the default paperSetting job timeout Setting the humidity modeMedia and tray Loading originalsOn the scanner glass Document feeder CLX-3185FN/CLX-3185FW onlyMedia sizes supported in each mode Mode Size SourceSelecting print media Changing the tray size for print mediaMedia and tray Tips on using the manual feeding method Loading paper in the trayPrinting on special media TrayEnvelopes TransparenciesLabels Acceptable UnacceptableSetting the paper size and type Using the output supportMedia and tray Printer driver features PrintingIntroducing useful software program Basic printingCanceling a print job Using a favorite settingOpening printing preferences Click Properties or PreferencesUsing help Using special print featuresFitting your document to a selected paper size Using watermarksChange percentage of your document Using overlay Advanced OptionsChanging the default print settings Setting your machine as a default machinePrinting to a file PRN Macintosh printingLinux printing Printing from applicationsConfiguring Printer Properties Open the Unified Driver ConfiguratorPrinting files Printer Properties window opensBasic copying Changing the settings for each copyCopying Changing the default copy settings Using special copy featuresID card copying Up or 4-up copying N-upDeciding the form of copy output Poster copyingClone copying Erasing background imagesCopying Scanning Basic scanning methodScanning originals and sending to your computer Scan to PC For USB connected machineScanning to Email Setting up an e-mail accountID admin Password sec00000 Changing the settings for each scan job Changing the default scan settingsSetting up Address Book CLX-3185FN/CLX-3185FW only Registering speed email numbersUsing Samsung Scan and Fax Manager Using Address Book entriesSearching Address Book for an entry Printing Address BookSet Scan Button tab Change Port tabScanning with TWAIN-enabled software Scanning using the WIA driverWindows XP Windows VistaMacintosh scanning Linux ScanningScanning with USB Scanning with networkAdding Job Type Settings Using the Image ManagerTo save a new Job Type setting To save a Job Type setting for the next scan jobTools Name Function Preparing to fax Using a fax in your computerFaxing clx-3185fn/clx-3185fw only Sending a fax in your machine Delaying a fax transmission Adding documents to a reserved delay fax jobCanceling a reserved delay fax job Sending a fax to multiple destinationsReceiving a fax in your machine Adjusting the document settings Receiving in secure receiving modeActivating secure receiving mode ResolutionSetting up Address Book Forwarding a fax to another destinationGroup dial numbers Printing Address Book Printing sent fax report automaticallyDeleting a Address Book for entry Scanning to a USB memory device About USB memoryPlugging in a USB memory device Printing from a USB memory device Backing up dataManaging USB memory Deleting an image fileFormatting a USB memory device Viewing the USB memory statusMachine status and advanced feature Fax setup CLX-3185FN/CLX-3185FW onlyChanging the fax setup options SendingCopy setup Change DefaultChanging the copy setup options Auto ReportPrinting a report Clearing memoryItems Option Network CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185 FW onlyMenu overview Machine status and advanced feature DHCPv6 Config WirelessdWPS Setting Wlan SettingTo access SyncThru Web Service SyncThru Web Service overviewManagement tools Introducing useful management toolsUsing the Smart Panel program Mail notification setupSetting the system administrator information Maintenance tabUsing the Linux Unified Driver Configurator Changing the Smart Panel Program SettingsOpening the Unified Driver Configurator SmarThruPrinters configuration window Printers Configuration Scanners PortsSwitches to Printers configuration Printers tabScanners configuration Ports configurationSwitches to Scanners configuration Switches to Ports configurationMaintenance Adjusting the color contrastCleaning the machine Finding the serial numberMaintenance Cleaning the scan unit Scanner lid Scanner glass ADF sheet White sheetTips for moving & storing your machine Maintenance partsStoring the toner cartridge Troubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jamsMessage Location of Jam Go to Clearing original document jams CLX-3185FN/CLX-3185FW onlyClearing paper jams Fuser unit area Paper exit area Checking display messages Message Meaning Suggested solutionsUnderstanding display messages Dhcp problem ReconfigureCall for service Install TonerPrepare toner ReplaceFuser soon Replace TonerSolving other problems Power problemsPaper feeding problems Condition Suggested solutionsPrinting problems Condition Possible cause Suggested solutionsPrinting quality problems Toner specks DropoutsPrinting Preferences, click Paper tab, White SpotsCondition Condition Suggested solution Copying problemsScanning problems Common Windows problems Fax problemsSamsung Scan and Fax Manager Problem Common Linux problems Common Macintosh problems Supplies and accessories How to purchaseAvailable maintenance parts Supplies and accessoriesChecking replaceable’s lifespan Replacing the toner cartridgeReplacing the imaging unit Replacing the waste toner container Supplies and accessories Specifications Hardware specificationsEnvironmental specifications SpecificationsPower consumption Electrical specificationsPower ratinga Print media specifications Type Size Dimensions Weighta CapacitybCountry/Regio Customer Care Center Web Site Contact samsung worldwideContact Samsung worldwide Philippines Glossary Dot Matrix Printer DuplexDuty Cycle EmulationITU-T No chart IeeeIntranet IP addressResolution ModemNetWare OriginalsSubnet Mask Toner CartridgeUNC Path WatermarkIndex Features Job timeout setting Language 1 LCD displayMaintenance parts 1 manual tray Network setup 4 number keypad 6 N-up copy 2 N-up printingPoster Power button 3, 6 power off Power saverPrint resolution set Print resolution, setSyncThru Web Service Using help WatermarkWi-Fi Protected Setup WPS Windows Toner cartridge
Top Page Image Contents