administrator to get the static IP address.
•For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. However, if it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP).
•For the Static method
If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine.
Example)
If computer’s network information is as below:
Machine’s network information should be as below:
17.The wireless network is connecting according to the network configuration.
18.When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click Next.
19.The Installation process is being executed.
20.The Fax Queue Creator window appears during the installation process.
•For
•For
21.Click Continue on the Read Me window.
22.After the installation is finished, click Restart.
Setting a wireless network with network cable
Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures.
Refer to your network administrator, or the person that set up your wireless network for information about your network configuration.
Preparing items
Ensure you have next items ready.
•Access point
•
•Software CD that provided with your machine
•Wireless network printer (your machine)
•Network cable
Setting IP address
First, you have to set up an IP address for network printing and managements. In most cases, a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.
In a few situations, the IP address must be set manually. This is called a static IP and is often required in a corporate Intranets for security reasons.
•DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report. (See "Printing a network configuration report" on page 2.)
•Static IP assignment: Use SetIP program to change the IP address from your computer.
In an office environment, we recommend that you contact a network administrator to set this address for you.
IP setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report.
For using SetIP program, disable the computer firewall before continuing by performing the following:
1.Open Start > All programs > Control Panel.
3.Click Windows Firewall.
4.Disable the firewall.
Installing the program
1.Insert the software CD provided with your machine. When the driver CD runs automatically, close that window.
2.Start Windows Explorer and open the X drive. (X represents your
3.Double-click Application > SetIP.
5.Click OK. If necessary, select a language from the
6.Follow the instructions in the window and complete the installation.
Starting the program
1.Connect your machine to the network with a network cable.
2.Turned on the machine.
3.From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP.
4.Click on the 
icon (third from left) in the SetIP window to open the TCP/IP configuration window.
Wireless network setup