Samsung CLX-318X Installing wired network-connected machine’s driver, Network parameter setting

Page 43

enter 192.168.1.X (X is number between 1 and 254 other than the computer’s address).

•Subnet Mask: Enter a Subnet Mask.

•Default Gateway: Enter a Default Gateway.

6.Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct.

7.Click Exit to close the SetIP program.

8.If necessary, restart the computer’s firewall.

IPv4 setting using SetIP Program (Macintosh)

For using SetIP program, disable the computer firewall before continuing by performing the following.

1.Open System Preferences.

2.Click Security.

3.Click the Firewall menu.

4.Turn firewall off.

The following instructions may vary from your model.

1.Connect your machine to the network with a network cable.

2.Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.

3.Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPapplet.html page that shows the printer’s name and IP address information.

4.Highlight the printer information row and select the Setup icon, which is the second icon from the left in the application menu bar. A TCP/IP Configuration window will open.

If the printer was not shown in the information row, select the Manual Setting icon (third from left) to open the TCP/IP Configuration window.

5.Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding.

•MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.

•IP Address: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X (X is number between 1 and 254 other than the computer’s address).

•Subnet Mask: Enter a Subnet Mask.

•Default Gateway: Enter a Default Gateway.

6.Select Apply, then OK, and OK again. The printer will automatically print the configuration report. Confirm that all the settings are correct. Quit Safari. You may close and eject the installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully changed the IP address, subnet mask, and gateway.

IPv4 setting using SetIP Program (Linux)

SetIP program should be automatically installed during the printer driver installation.

1.Print the machine’s network configuration report to find your machine’s MAC address.

2.Open the /opt/Samsung/mfp/share/utils/.

3.Double-click the SetIPApplet.html file.

4.Click to open the TCP/IP configuration window.

5.Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply.

When you enter the MAC address, enter it without a colon(:).

6.The machine prints the network information. Confirm all the settings are correct.

7.Close the SetIP program.

Network parameter setting

You can also set up the various network settings through the network administration programs such as SyncThru™ Web Admin Service and

SyncThru™ Web Service.

Restoring factory default settings

You may need to reset the machine to the factory default settings when machine that you are using is connected to new network environment.

Restoring factory default settings using control panel

1.Press Menu on the control panel.

2.Press the left/right arrow until Network appears and press OK.

3.Press the left/right arrow until Clear Setting appears and press OK.

4.Press the left/right arrow until Yes appears and press OK.

5.Turn off and restart machine to apply settings.

Restoring factory default settings using SyncThru™ Web Service

1.Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window.

For example:

2.Click Go to access the SyncThru™ Web Service.

3.Click Login on the upper right of the website. The Login window appears.

4.Type in the ID and Password, and then click Login.

If it is your first time logging into SyncThru™ Web Service, type in the below default ID and password.

•ID: admin

•Password: sec00000

5.Click Settings > Network Settings.

6.Click Restore Default on the left pane of the website.

7.Click Clear.

8.Click Yes when the confirmation window appears.

9.Click OK when the success window appears.

10.Turn off and restart machine to apply settings.

Installing wired network-connected machine’s driver

Windows

You can set up the machine driver, follow the steps below.

This is recommended for most users. All components necessary for machine operations will be installed.

1.Make sure that the machine is connected to the network or USB and powered on.

2.Insert the supplied software CD into your CD-ROM drive.

Network setup (CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185FW only)_ 3

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Multi-Functional Printer Contents Setting job timeout Setting the humidity mode Completing the Installation TroubleshootingUsing the save modes Setting the default paperSetting up Address Book Using Samsung Scan and Fax ManagerPreparing to fax Using a fax in your computer Adjusting the document settingsSolving other problems Using the Smart Panel programUsing the Linux Unified Driver Configurator Maintenance partsCopyright CopyrightOperating environment Safety informationImportant safety symbols Safety informationOperating method Maintenance / Checking Installation / MovingSupply usage Regulatory information Laser Safety StatementOzone Safety Regulatory informationPower Saver Mercury SafetyRecycling Canadian Radio Interference Regulations Correct disposal of batteries in this productTaiwan only Radio Frequency Emissions FCC Information to the UserRussia only Germany only Turkey only FCC Statement for Wireless LAN useFederal Communications Commission FCC Ringer Equivalence Number Fax BrandingYou should also know that Approvals and Certifications Replacing the Fitted Plug for UK OnlyDeclaration of Conformity European Countries Important warningEC Certification European States qualified under wireless approvalsRegulatory Compliance Statements Wireless GuidanceOpenSSL License Original SSLeay License China only Regulatory information Convention Description Example About this user’s guideConvention About this user’s guideDownloadable Finding more informationMaterial name Description Samsung websiteSpecial Features Features of your new productFeatures of your new product Features by Models Introduction IntroductionMachine overview CLX-3185/CLX-3185N/CLX-3185WK Front viewRear view Control panel overview CLX-3185/CLX-3185N/CLX-3185WK Machine overview CLX-3185FN/CLX-3185FW Rear view Control panel overview CLX-3185FN/CLX-3185FW Direct USB CLX-3185FN Scan/EmailWPS CLX-3185FW Introducing the useful buttons Understanding the Status LEDWPS button CLX-3185WK/CLX-3185FW only Acknowledging the status of the toner cartridgeGetting started Setting up the hardwareGetting started Supplied softwareMicrosoft Windows System requirementsMacintosh Requirements Installing USB connected machine’s driverLinux WindowsInstalling the Unified Linux Driver Sharing your machine locally Installing the SmartPanelInstalling the Printer Settings Utility Setting up a host computerCheck the Share this printer Setting up a client computerSelect All programs Accessories Windows Explorer Devices and PrintersNetwork environment Using a wired networkIntroducing useful network programs IPv4 setting using SetIP Program Windows Printing a network configuration reportSetting IP address IPv4 setting using control panel WindowsNetwork parameter setting Installing wired network-connected machine’s driverRestoring factory default settings Snmp Community Name Search againDirect Input HelpClick Add on the Printer List Install Linux Driver and add network PrinterOpen the Applications folder Utilities Print Setup Utility HSelect Uninstall and click UninstallActivating IPv6 IPv6 ConfigurationSetting IPv6 addresses Using SyncThru Web ServiceUsing a wireless network Wireless network setup clx-3185fw/clx-3185wk onlyItems to prepare Installing a wireless network with cablesChanging WPS mode Setting a wireless network in PBC modeSetting a wireless network in PIN mode Setting a wireless network with USB cableFor the Static method Wireless Network Setting Complete window appearsCase of WPA For the Dhcp methodCreating the Ad-Hoc network in Windows Installing the machine on an Ad-Hoc wireless network WindowsCreating the infrastructure network in Macintosh Click Continue on the Read Me window Creating the Ad-Hoc network in MacintoshIP setting using SetIP Program Windows Setting a wireless network with network cablePreparing items IP setting using SetIP Program Macintosh Configuring the machine’s wireless networkUsing SyncThru Web Service Completing the Installation Resetting factory default valuesTroubleshooting Solving other problems Changing the clock mode CLX-3185FN/CLX-3185FW only Basic setupAltitude adjustment Setting the date and time CLX-3185FN/CLX-3185FW onlySetting sounds Changing the default mode CLX-3185FN/CLX-3185FW onlySetting the default paper Using the save modesSetting the humidity mode Setting job timeoutDocument feeder CLX-3185FN/CLX-3185FW only Media and trayLoading originals On the scanner glassChanging the tray size for print media Media sizes supported in each modeMode Size Source Selecting print mediaMedia and tray Tray Tips on using the manual feeding methodLoading paper in the tray Printing on special mediaAcceptable Unacceptable EnvelopesTransparencies LabelsUsing the output support Setting the paper size and typeMedia and tray Basic printing Printer driver featuresPrinting Introducing useful software programClick Properties or Preferences Canceling a print jobUsing a favorite setting Opening printing preferencesUsing special print features Using helpChange percentage of your document Using watermarksFitting your document to a selected paper size Advanced Options Using overlayMacintosh printing Changing the default print settingsSetting your machine as a default machine Printing to a file PRNPrinting from applications Linux printingPrinter Properties window opens Configuring Printer PropertiesOpen the Unified Driver Configurator Printing filesCopying Changing the settings for each copyBasic copying Up or 4-up copying N-up Changing the default copy settingsUsing special copy features ID card copyingErasing background images Deciding the form of copy outputPoster copying Clone copyingCopying For USB connected machine ScanningBasic scanning method Scanning originals and sending to your computer Scan to PCID admin Password sec00000 Setting up an e-mail accountScanning to Email Registering speed email numbers Changing the settings for each scan jobChanging the default scan settings Setting up Address Book CLX-3185FN/CLX-3185FW onlyPrinting Address Book Using Samsung Scan and Fax ManagerUsing Address Book entries Searching Address Book for an entryChange Port tab Set Scan Button tabWindows Vista Scanning with TWAIN-enabled softwareScanning using the WIA driver Windows XPScanning with network Macintosh scanningLinux Scanning Scanning with USBTo save a Job Type setting for the next scan job Adding Job Type SettingsUsing the Image Manager To save a new Job Type settingTools Name Function Faxing clx-3185fn/clx-3185fw only Using a fax in your computerPreparing to fax Sending a fax in your machine Sending a fax to multiple destinations Delaying a fax transmissionAdding documents to a reserved delay fax job Canceling a reserved delay fax jobReceiving a fax in your machine Resolution Adjusting the document settingsReceiving in secure receiving mode Activating secure receiving modeForwarding a fax to another destination Setting up Address BookGroup dial numbers Deleting a Address Book for entry Printing sent fax report automaticallyPrinting Address Book Plugging in a USB memory device About USB memoryScanning to a USB memory device Backing up data Printing from a USB memory deviceViewing the USB memory status Managing USB memoryDeleting an image file Formatting a USB memory deviceSending Machine status and advanced featureFax setup CLX-3185FN/CLX-3185FW only Changing the fax setup optionsAuto Report Copy setupChange Default Changing the copy setup optionsClearing memory Printing a reportMenu overview Network CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185 FW onlyItems Option Machine status and advanced feature Wlan Setting DHCPv6 ConfigWirelessd WPS SettingIntroducing useful management tools To access SyncThru Web ServiceSyncThru Web Service overview Management toolsMaintenance tab Using the Smart Panel programMail notification setup Setting the system administrator informationSmarThru Using the Linux Unified Driver ConfiguratorChanging the Smart Panel Program Settings Opening the Unified Driver ConfiguratorPrinters tab Printers configuration windowPrinters Configuration Scanners Ports Switches to Printers configurationSwitches to Ports configuration Scanners configurationPorts configuration Switches to Scanners configurationFinding the serial number MaintenanceAdjusting the color contrast Cleaning the machineMaintenance Scanner lid Scanner glass ADF sheet White sheet Cleaning the scan unitStoring the toner cartridge Maintenance partsTips for moving & storing your machine Tips for avoiding paper jams TroubleshootingTroubleshooting Redistributing tonerClearing paper jams Clearing original document jams CLX-3185FN/CLX-3185FW onlyMessage Location of Jam Go to Fuser unit area Paper exit area Understanding display messages Message Meaning Suggested solutionsChecking display messages Install Toner Dhcp problemReconfigure Call for serviceReplace Toner Prepare tonerReplace Fuser soonPower problems Solving other problemsCondition Suggested solutions Paper feeding problemsCondition Possible cause Suggested solutions Printing problemsPrinting quality problems White Spots Toner specksDropouts Printing Preferences, click Paper tab,Condition Scanning problems Copying problemsCondition Suggested solution Samsung Scan and Fax Manager Problem Fax problemsCommon Windows problems Common Linux problems Common Macintosh problems Supplies and accessories Supplies and accessoriesHow to purchase Available maintenance partsReplacing the toner cartridge Checking replaceable’s lifespanReplacing the imaging unit Replacing the waste toner container Supplies and accessories Specifications SpecificationsHardware specifications Environmental specificationsPower ratinga Electrical specificationsPower consumption Type Size Dimensions Weighta Capacityb Print media specificationsContact Samsung worldwide Contact samsung worldwideCountry/Regio Customer Care Center Web Site Philippines Glossary Emulation Dot Matrix PrinterDuplex Duty CycleIP address ITU-T No chartIeee IntranetOriginals ResolutionModem NetWareWatermark Subnet MaskToner Cartridge UNC PathIndex Network setup 4 number keypad 6 N-up copy 2 N-up printing FeaturesJob timeout setting Language 1 LCD display Maintenance parts 1 manual trayPrint resolution, set Poster Power button 3, 6 power offPower saver Print resolution setToner cartridge SyncThru Web ServiceUsing help Watermark Wi-Fi Protected Setup WPS Windows
Top Page Image Contents