Samsung CLX-318X manual Setting a wireless network with USB cable

Page 49

connect, the machine stops the wireless connection function if the machine fails to get the wireless connection. Try again to connect to the wireless network after solving the connection problem.

Canceling a wireless network connection process in PBC mode

To cancel the wireless network connection function when the machine is connecting to the access point (or wireless router) in PBC mode, press

the WPS ( ) button on the control panel again. The Connecting

Canceled and the Wait 2 minutes for Reconnecting messages appear in order on the display.

Disconnecting a wireless network connection in PBC mode

To disconnect the wireless network connection, press the WPS ( ) button on the control panel again.

•When the access point (Wi-Fi Network) is in idle mode: The Disconnected message appears on the display. The machine is returned to ready mode.

•When the access point (Wi-Fi Network) is being used: The Wait Job to Finish message appears on the display. The machine waits until the current job is finished. Then, the wireless network connection is automatically disconnected. The machine is returned

to ready mode.

Setting a wireless network in PIN mode

Factory default in your machine is PBC mode. To change to PIN mode, refer to "Changing WPS mode" on page 2.

Connecting a wireless network in PIN mode

To connect to the wireless network in PIN mode, follow the steps below.

You also need to check the status of the WPS ( ) button and the wireless LED.

1.Press the WPS ( ) button for more than four seconds on the control panel.

2.Enter xxxx-xxxx on AP:02:00: Eight-digit PIN number appears on the display. Then, the machine starts waiting for up to two minutes until you enter the supplied PIN number on the access point (or wireless router).

3. : Enter the supplied PIN number on the access point (or wireless router) within two minutes.

4.Connecting: The machine is connecting to the wireless network.

5.Connected: When the machine is successfully connected to the wireless network, the blue wireless LED light stays on.

•AP SSID: After completing the wireless network connection process, AP’s SSID information appears on the display.

If the machine fails to connect to the wireless network, the Connecting Failed and the Wait 2 minutes for Reconnecting messages appear in turn on the display. Then, the machine tries to re-connect to the wireless network.

Re-connecting to a wireless network in PIN mode

If you press the WPS ( ) button on the control panel when the

wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address.

1.Connecting: If you press the WPS ( ) button on the control panel

when the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address.

2.Connected: When the machine is successfully connected to the wireless network, the blue wireless LED light stays on.

•AP SSID: After completing the wireless network connection process, AP’s SSID information appears on the display.

If there is no previously used access point (or wireless router), or the network settings have been changed, the Connecting Failed and the Wait 2 minutes for Reconnecting messages appear in turn on the display, and then the machine tries to re-connect to the wireless network. After the second attempt to connect, the machine stops the wireless connection function if the machine fails to get the wireless connection. Try again to connect to the wireless network after solving the connection problem.

Canceling a wireless network connection process in PIN mode

To cancel the wireless network connection function when the machine is connecting to the access point (or wireless router) in PIN mode, press

the WPS ( ) button on the control panel again. The Connecting

Canceled and the Wait 2 minutes for Reconnecting messages appear in order on the display.

Disconnecting a wireless network connection in PIN mode

To disconnect the wireless network connection, press the WPS ( ) button on the control panel again.

•When the access point (Wi-Fi Network) is in idle mode: The Disconnected message appears on the display. The machine is returned to ready mode.

•When the access point (Wi-Fi Network) is being used: The Wait Job to Finish message appears on the display. The machine waits until the current job is finished. Then, the wireless network connection is automatically disconnected. The machine is returned

to ready mode.

Setting a wireless network with USB cable

Refer to your network administrator or the person that set up your wireless network for information about your network configuration.

Installing the machine on a wireless network with an Access Point (Windows)

Items to prepare

Ensure you have next items ready.

•Access point

•Network-connected computer

•Software CD that provided with your machine

•The machine installed with a wireless network interface

•USB cable

Creating the infrastructure network in Windows

When the items are ready, follow below steps:

Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 3

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Multi-Functional Printer Contents Using the save modes Completing the Installation TroubleshootingSetting the default paper Setting job timeout Setting the humidity modePreparing to fax Using a fax in your computer Using Samsung Scan and Fax ManagerAdjusting the document settings Setting up Address BookUsing the Linux Unified Driver Configurator Using the Smart Panel programMaintenance parts Solving other problemsCopyright CopyrightImportant safety symbols Safety informationSafety information Operating environmentOperating method Maintenance / Checking Installation / MovingSupply usage Ozone Safety Laser Safety StatementRegulatory information Regulatory informationPower Saver Mercury SafetyRecycling Taiwan only Radio Frequency Emissions Correct disposal of batteries in this productFCC Information to the User Canadian Radio Interference RegulationsRussia only Germany only Turkey only FCC Statement for Wireless LAN useFederal Communications Commission FCC Ringer Equivalence Number Fax BrandingYou should also know that Declaration of Conformity European Countries Replacing the Fitted Plug for UK OnlyImportant warning Approvals and CertificationsEC Certification European States qualified under wireless approvalsRegulatory Compliance Statements Wireless GuidanceOpenSSL License Original SSLeay License China only Regulatory information Convention About this user’s guideAbout this user’s guide Convention Description ExampleMaterial name Description Finding more informationSamsung website DownloadableSpecial Features Features of your new productFeatures of your new product Features by Models Machine overview CLX-3185/CLX-3185N/CLX-3185WK IntroductionFront view IntroductionRear view Control panel overview CLX-3185/CLX-3185N/CLX-3185WK Machine overview CLX-3185FN/CLX-3185FW Rear view Control panel overview CLX-3185FN/CLX-3185FW Direct USB CLX-3185FN Scan/EmailWPS CLX-3185FW Introducing the useful buttons Understanding the Status LEDWPS button CLX-3185WK/CLX-3185FW only Acknowledging the status of the toner cartridgeGetting started Setting up the hardwareSupplied software Getting startedMicrosoft Windows System requirementsMacintosh Linux Installing USB connected machine’s driverWindows RequirementsInstalling the Unified Linux Driver Installing the Printer Settings Utility Installing the SmartPanelSetting up a host computer Sharing your machine locallySelect All programs Accessories Windows Explorer Setting up a client computerDevices and Printers Check the Share this printerNetwork environment Using a wired networkIntroducing useful network programs Setting IP address Printing a network configuration reportIPv4 setting using control panel Windows IPv4 setting using SetIP Program WindowsNetwork parameter setting Installing wired network-connected machine’s driverRestoring factory default settings Direct Input Search againHelp Snmp Community NameOpen the Applications folder Utilities Print Setup Utility Install Linux Driver and add network PrinterHSelect Uninstall and click Uninstall Click Add on the Printer ListSetting IPv6 addresses IPv6 ConfigurationUsing SyncThru Web Service Activating IPv6Using a wireless network Wireless network setup clx-3185fw/clx-3185wk onlyChanging WPS mode Installing a wireless network with cablesSetting a wireless network in PBC mode Items to prepareSetting a wireless network in PIN mode Setting a wireless network with USB cableCase of WPA Wireless Network Setting Complete window appearsFor the Dhcp method For the Static methodCreating the Ad-Hoc network in Windows Installing the machine on an Ad-Hoc wireless network WindowsCreating the infrastructure network in Macintosh Click Continue on the Read Me window Creating the Ad-Hoc network in MacintoshIP setting using SetIP Program Windows Setting a wireless network with network cablePreparing items IP setting using SetIP Program Macintosh Configuring the machine’s wireless networkUsing SyncThru Web Service Completing the Installation Resetting factory default valuesTroubleshooting Solving other problems Altitude adjustment Basic setupSetting the date and time CLX-3185FN/CLX-3185FW only Changing the clock mode CLX-3185FN/CLX-3185FW onlySetting sounds Changing the default mode CLX-3185FN/CLX-3185FW onlySetting the default paper Using the save modesSetting the humidity mode Setting job timeoutLoading originals Media and trayOn the scanner glass Document feeder CLX-3185FN/CLX-3185FW onlyMode Size Source Media sizes supported in each modeSelecting print media Changing the tray size for print mediaMedia and tray Loading paper in the tray Tips on using the manual feeding methodPrinting on special media TrayTransparencies EnvelopesLabels Acceptable UnacceptableUsing the output support Setting the paper size and typeMedia and tray Printing Printer driver featuresIntroducing useful software program Basic printingUsing a favorite setting Canceling a print jobOpening printing preferences Click Properties or PreferencesUsing special print features Using helpChange percentage of your document Using watermarksFitting your document to a selected paper size Advanced Options Using overlaySetting your machine as a default machine Changing the default print settingsPrinting to a file PRN Macintosh printingPrinting from applications Linux printingOpen the Unified Driver Configurator Configuring Printer PropertiesPrinting files Printer Properties window opensCopying Changing the settings for each copyBasic copying Using special copy features Changing the default copy settingsID card copying Up or 4-up copying N-upPoster copying Deciding the form of copy outputClone copying Erasing background imagesCopying Basic scanning method ScanningScanning originals and sending to your computer Scan to PC For USB connected machineID admin Password sec00000 Setting up an e-mail accountScanning to Email Changing the default scan settings Changing the settings for each scan jobSetting up Address Book CLX-3185FN/CLX-3185FW only Registering speed email numbersUsing Address Book entries Using Samsung Scan and Fax ManagerSearching Address Book for an entry Printing Address BookChange Port tab Set Scan Button tabScanning using the WIA driver Scanning with TWAIN-enabled softwareWindows XP Windows VistaLinux Scanning Macintosh scanningScanning with USB Scanning with networkUsing the Image Manager Adding Job Type SettingsTo save a new Job Type setting To save a Job Type setting for the next scan jobTools Name Function Faxing clx-3185fn/clx-3185fw only Using a fax in your computerPreparing to fax Sending a fax in your machine Adding documents to a reserved delay fax job Delaying a fax transmissionCanceling a reserved delay fax job Sending a fax to multiple destinationsReceiving a fax in your machine Receiving in secure receiving mode Adjusting the document settingsActivating secure receiving mode ResolutionForwarding a fax to another destination Setting up Address BookGroup dial numbers Deleting a Address Book for entry Printing sent fax report automaticallyPrinting Address Book Plugging in a USB memory device About USB memoryScanning to a USB memory device Backing up data Printing from a USB memory deviceDeleting an image file Managing USB memoryFormatting a USB memory device Viewing the USB memory statusFax setup CLX-3185FN/CLX-3185FW only Machine status and advanced featureChanging the fax setup options SendingChange Default Copy setupChanging the copy setup options Auto ReportClearing memory Printing a reportMenu overview Network CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185 FW onlyItems Option Machine status and advanced feature Wirelessd DHCPv6 ConfigWPS Setting Wlan SettingSyncThru Web Service overview To access SyncThru Web ServiceManagement tools Introducing useful management toolsMail notification setup Using the Smart Panel programSetting the system administrator information Maintenance tabChanging the Smart Panel Program Settings Using the Linux Unified Driver ConfiguratorOpening the Unified Driver Configurator SmarThruPrinters Configuration Scanners Ports Printers configuration windowSwitches to Printers configuration Printers tabPorts configuration Scanners configurationSwitches to Scanners configuration Switches to Ports configurationAdjusting the color contrast MaintenanceCleaning the machine Finding the serial numberMaintenance Scanner lid Scanner glass ADF sheet White sheet Cleaning the scan unitStoring the toner cartridge Maintenance partsTips for moving & storing your machine Troubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jamsClearing paper jams Clearing original document jams CLX-3185FN/CLX-3185FW onlyMessage Location of Jam Go to Fuser unit area Paper exit area Understanding display messages Message Meaning Suggested solutionsChecking display messages Reconfigure Dhcp problemCall for service Install TonerReplace Prepare tonerFuser soon Replace TonerPower problems Solving other problemsCondition Suggested solutions Paper feeding problemsCondition Possible cause Suggested solutions Printing problemsPrinting quality problems Dropouts Toner specksPrinting Preferences, click Paper tab, White SpotsCondition Scanning problems Copying problemsCondition Suggested solution Samsung Scan and Fax Manager Problem Fax problemsCommon Windows problems Common Linux problems Common Macintosh problems How to purchase Supplies and accessoriesAvailable maintenance parts Supplies and accessoriesReplacing the toner cartridge Checking replaceable’s lifespanReplacing the imaging unit Replacing the waste toner container Supplies and accessories Hardware specifications SpecificationsEnvironmental specifications SpecificationsPower ratinga Electrical specificationsPower consumption Type Size Dimensions Weighta Capacityb Print media specificationsContact Samsung worldwide Contact samsung worldwideCountry/Regio Customer Care Center Web Site Philippines Glossary Duplex Dot Matrix PrinterDuty Cycle EmulationIeee ITU-T No chartIntranet IP addressModem ResolutionNetWare OriginalsToner Cartridge Subnet MaskUNC Path WatermarkIndex Job timeout setting Language 1 LCD display FeaturesMaintenance parts 1 manual tray Network setup 4 number keypad 6 N-up copy 2 N-up printingPower saver Poster Power button 3, 6 power offPrint resolution set Print resolution, setUsing help Watermark SyncThru Web ServiceWi-Fi Protected Setup WPS Windows Toner cartridge
Top Page Image Contents