Controls and Functions
1.DISPLAY STAND
Optional accessory for tabletop installations.
2.REMOTE CONTROL SENSOR
Receives the signals from the remote control.
3.AMBIENT LIGHT SENSOR (SP-42 and SP-50 only)
This sensor measures the light level in the viewing area; it is active when the Energy Mode is set to Auto (refer to Energy Mode on page 41 for more information).
4.STANDBY/ON INDICATOR
-Lights green to indicate normal operation;
-Flashes green (once per second) when the AUTO OFF feature is active.
-Lights red to indicate that the CinemaWall is in standby mode;
-Flashes green or red (twice per second) to indicate an error condition.
5.HANDLES
ALWAYS use the handles when carrying the unit.
6.STANDBY/ON BUTTON ( 
)
Press to put the display into operation or standby mode.
7.MENU
Press this button to show or hide the
8.INFO/SET
When the OSD controls are visible
When no OSD appears
9.INPUT/UP ( 
)
Press this button to switch inputs or move the cursor up in the current OSD menu.
10.ASPECT RATIO/DOWN ( 
)
Press this button to change the aspect ratio (screen size) or move the cursor down in the current OSD menu.
11.LEFT ( 
) / VOL – and RIGHT ( 
) / VOL +
These decrease or increase the volume of sound from the speakers, or move the cursor left or right in the OSD mode.