Runco SP-42, SP-50, SP-60 manual Ambient Light, Ventilation

Installation

• As it lies flat with the screen face down. Place the protective sheet, which was wrapped around the plasma monitor when it was packaged, between the screen and your work surface to avoid scratching or otherwise damaging the screen surface.

In general, minimize or eliminate light sources directed at the display. Contrast ratio in your	Ambient Light
images will be noticeably reduced if light directly strikes the display, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
If you are mounting the CinemaWall in an enclosure, leave at least 2 inches (50 mm) of	Ventilation
space on all sides between it and surrounding objects, as shown in Figure 3-2.This allows
heat to disperse, maintaining the proper operating temperature.

50mm (2")

Wall

50mm (2")

50mm (2")

Wall

50mm (2")

50mm (2")

Figure 3-2. Ventilation Requirements for Enclosure Mounting

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 17