Runco SP-60, SP-42, SP-50 manual Video, Audio, Picture-in-Picture PIP

Serial Communications

Table 6-1. Serial Commands (continued)

	Command			Value Range			Description
ASCII			HEX	Minimum	Maximum
SZMS06		53 5A 4D 53 30 36		–	–	Sets the aspect ratio to 14:9.
SZMS09		53 5A 4D 53 30 39		–	–	Sets the aspect ratio to UNDERSCAN.
SZMS10		53 5A 4D 53 31 30		–	–	Sets the aspect ratio to VIRTUAL
						CINEMA.
					Video
PMTS00		50	4D 54 53 30 30	–	–	Turns video muting off. (Note 2)
PMTS01		50	4D 54 53 30 31	–	–	Turns video muting on. (Note 2)
STLS00		53	54 4C 53 30 30	–	–	Turns the STILL setting to OFF.
						(Note 2)
STLS01		53	54 4C 53 30 31	–	–	Turns the STILL setting to ON. (Note 2)
					Audio
AMTS00		41	4D 54 53 30 30	–	–	Turns audio mute OFF. (Note 2)
AMTS01		41	4D 54 53 30 31	–	–	Turns audio mute ON. (Note 2)
AUSS01		41	55 53 53 30 31	–	–	Sets audio source to main.
AUSS02		41	55 53 53 30 32	–	–	Sets audio source to sub.
VOL		56	4F 4C	000	042	Adjusts the audio volume.
				Picture-in-Picture (PIP)
MSCS00		4D 53 43 53 30 30		–	–	Turns 2-screen display operation OFF.
MSSS01		4D 53 53 53 30 31		–	–	Sets PIP sub-screen size to 1 (small-
						est).
MSSS02		4D 53 53 53 30 32		–	–	Sets PIP sub-screen size to 2.
MSSS03		4D 53 53 53 30 33		–	–	Sets PIP sub-screen size to 3.
MSSS04		4D 53 53 53 30 34		–	–	Sets PIP sub-screen size to 4 (largest).
MSTS01		4D 53 54 53 30 31		–	–	Sets 2-screen operation to 2 SCREEN
						(side-by-side; main screen on left).

Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 55