Runco SP-50 Command Value Range Description, Minimum Maximum, Input Select Note, Aspect Ratio

Serial Communications

Table 6-1lists the CinemaWall serial command set. Except where indicated, adjustments made using serial commands are stored in the same memory as those made in Installer Adjust mode.

Table 6-1. Serial Commands

	Command					Value Range		Description
ASCII				HEX		Minimum	Maximum
							Power
POF		50	4F 46			–	–	Power OFF.
PON		50	4F 4E			–	–	Power ON.
						Input Select (Note 1)
IN1		49	4E	31		–	–	Switches the main screen to INPUT1.
IN2		49	4E	32		–	–	Switches the main screen to INPUT2.
IN3		49	4E	33		–	–	Switches the main screen to INPUT3.
IN4		49	4E	34		–	–	Switches the main screen to INPUT4.
IN5		49	4E	35		–	–	Switches the main screen to INPUT5.
INPS01		49	4E	50	53 30 31	–	–	Switches the main screen to INPUT1.
INPS02		49	4E	50	53 30 32	–	–	Switches the main screen to INPUT2.
INPS03		49	4E	50	53 30 33	–	–	Switches the main screen to INPUT3.
INPS04		49	4E	50	53 30 34	–	–	Switches the main screen to INPUT4.
INPS05		49	4E	50	53 30 35	–	–	Switches the main screen to INPUT5.
SSIS01		53	53 49 53 30 31			–	–	Switches the sub screen to INPUT1.
SSIS02		53	53 49 53 30 32			–	–	Switches the sub screen to INPUT2.
SWM		53	57 4D			–	–	Outputs main input to the full screen.
SWS		53	57 53			–	–	Outputs sub input to the full screen.
						Aspect Ratio
AST		41	53 54			–	–	Executes AUTO SETUP on Input 1.
SZMS00		53	5A 4D 53 30 30			–	–	Sets the aspect ratio to PIX by PIX.
SZMS01		53	5A 4D 53 30 31			–	–	Sets the aspect ratio to Standard 4:3.
SZMS02		53	5A 4D 53 30 32			–	–	Sets the aspect ratio to ANAMORPHIC
								16:9.
SZMS03		53	5A 4D 53 30 33			–	–	Sets the aspect ratio to LETTERBOX.
SZMS05		53	5A 4D 53 30 35			–	–	Sets the aspect ratio to VIRTUALWIDE.

Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

54 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual