Runco SP-42, SP-50, SP-60 manual MSTS08, MSTS09, MSTS10

Serial Communications

Table 6-1. Serial Commands (continued)

	Command	Value Range			Description
ASCII	HEX	Minimum	Maximum
MSTS02	4D 53 54 53 30 32	–	–	Sets 2-screen operation to PinP (lower
				right).
MSTS03	4D 53 54 53 30 33	–	–	Sets 2-screen operation to PinP (upper
				right).
MSTS04	4D 53 54 53 30 34	–	–	Sets 2-screen operation to PinP (upper
				left).
MSTS05	4D 53 54 53 30 35	–	–	Sets 2-screen operation to PinP (lower
				left).
MSTS06	4D 53 54 53 30 36	–	–	Sets 2-screen operation to PoutP
				(side-by-side; small sub-screen on left).

MSTS08	4D 53 54 53 30 38	–	–	Swaps main and sub-screens in PIP
				2-screen mode.
MSTS09	4D 53 54 53 30 39	–	–	Sets 2-screen operation to PoutP
				(side-by-side; small sub-screen on
				right).

MSTS10

4D 53 54 53 31 30

–

–

Sets 2-screen operation to 2 SCREEN (side-by-side, full height; main screen on left).

Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

56 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual