Runco SP-42, SP-50, SP-60 manual Language Refer to Changing the OSD Language on, Option

Operation

Sub Volume (Installer Adjust mode): Select Sub Volume from the Set-Up menu to adjust the audio input level for the current source. Do this for all sources, as needed to prevent sudden, drastic changes in sound volume when switching inputs.

For example, if a DVD player is connected to Input 4, a computer is connected to Input 1 and the audio output of the DVD player is fixed at a much higher level than that of the computer, reduce the Sub Volume for Input 4.

The Sub Volume control affects the current input only; the front-panel and remote volume controls are “master” controls; see Figure 4-7.

1	AUDIO INPUT	INPUT1
	(INPUT1)
		SUB VOLUME
2	AUDIO INPUT	INPUT2	INPUT	POWER
	(INPUT2)	SUB VOLUME	SELECTOR	AMPLIFIER
3	AUDIO INPUT	INPUT3
		SUB VOLUME
	(INPUT3)
				VOLUME
4	AUDIO INPUT	INPUT4
	(INPUT4)	SUB VOLUME
5	AUDIO INPUT	INPUT5
	(INPUT5)	SUB VOLUME

Figure 4-7. Audio System Functional Block Diagram

Language: Refer to Changing the OSD Language on page 27.

Energy Mode: Select Energy Mode from the Option menu to reduce power consumption and panel deterioration by limiting brightness of the screen. You can choose to limit brightness according to the input signal or in response to the ambient light level.

•Select AVERAGE to limit brightness in accordance with the input signal to produce a bright, easily viewed image.

•Select LEVEL 1 to limit brightness in accordance with the input signal. Power consumption is less than that used in AVERAGE mode.

•Select LEVEL 2 to limit brightness in accordance with the input signal. Power consumption is less than that used in LEVEL1 mode.

•Select LEVEL 3 to set the brightness at fixed level, regardless of input signal level (useful for preventing screen aging due to image burn).

•Select AUTO (Model SP-42), AUTO1 or AUTO2 (Model SP-50/SP-60) to have the CinemaWall adjust the brightness automatically in response to ambient lighting conditions, to optimize picture quality.

•To disable the Energy Mode feature, select MUTE (Model SP-50 and SP-60 only).

Option

CINEMAWALL						INPUT 3
PICTURE		SCREEN	SET-UP		OPTION
		LANGUAGE		: ENGLISH
		ENERGY MODE		: AUTO
		TIME / DATE
		PDP MGMT.
		AUTO SETUP MODE		: OFF
		AUTO FUNCTION		: OFF
SET	ENTER				MENU	EXIT

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 41