Runco SP-50, SP-42, SP-60 manual CinemaWall OSD Menu Structure

Operation

	Contrast		(Installer Adj.:
		-30 ... 0 ... +30
	Brightness (Note 2)		0 ... +255)
			(Note 1)
	Color
	H. Sharpen	0, +1, +2 ... +15	(PC signals only)
	V. Sharpen
	Tint	-30 ... 0 ... +30	(Installer Adj.:
			0 ... +60)
	Sharpness	-7, ... 0 ... +7	(Installer Adj.:
			0 ... +15)
		R. Gain
		G. Gain
		B. Gain	0 ... +255
Picture	White Balance	R. Offset
		G. Offset
(Note 1)
		B. Offset
		White Bal. Reset	Yes / No
		Return
		Red
		Yellow
		Green	0 ... +60
	Color Chart	Cyan
		Blue
		Magenta
		C. Chart Reset	Yes / No
		Return
	Gamma	1.8, 1.9, 2.0 ... 2.4
	Factory	Yes / No
	Image Position	H. Shift	-64 ... +63
			(Installer Adj.:	Option
		V. Shift
			+64 ... +191)
Screen	Frequency Adjust	-128 ... +127	(PC signals only;
			Auto Setup Mode
	Phase Adjust	-16 ... +15
(Note 1)
			must be OFF)
	H. Size	0 ... +64
	V. Size
	Image Reset	Yes / No
		Low, Mid-Low,
	Color Temp.	Middle, Mid-High or
		High
	Auto Off	On / Off
	Video NR	Off, Low, Middle or
		High
	MPEG Filter
	Chroma EE	On / Off
	Film Mode
Set-Up	Color Space	RGB, Comp. 1 or
		Comp. 2
	DVI Setup	Plug / Play	Video / PC
	(Input 2 only)
		Black Level	Low / High
		Auto,
		480p ... 1080i or
	Signal	640x480 ...
		1376x768 (choices
		vary per input)
	Brt. Enhance	On / Off
	Sub Volume	0 ... +20

Notes:

	English, Français,
Language	Español, Deutsch
	or Italiano
	Auto 1, Auto 2,
Energy Mode	Mute, Auto,
	Average, Level 1,
	Level 2 or Level 3
	Present Time	DST: On / Off
		Day, Hour, Minute
Time/Date
	Program Timer	On / Off
	Return
	Orbiter	Off, Type 1, Type 2 or
PDP Mgmt.		Type 3
	Soften	Off, 1, 2, 3 or 4
Auto Setup Mode	On / Off
Auto Function	Off / Input 1 /
	Input 4
		MON, TUE ... SUN
		(once only at the
		selected day/time)
	Date	or
		*MON, *TUE ... *SUN
Program Timer		(weekly)
(SP-42) /		or “*” (daily)
Screen Maint.
	On	00:00 ... 23:59
(SP-50/SP-60)
	Off
	Input	Input 1 ... Input 5 or
		“-” (last)
	Pattern	White, Inverse, Orbiter
		or “-” (last)
	Off, Inverse, White,
Test Pattern	Red, Green, Blue or
	Yellow
	R. Adjust
		0 ... +255
	G. Adjust
Sidebar Adjust
	B. Adjust
	Auto Side Mask	Off / On
	Default
	1200, 2400, 4800,
Baud Rate	9600, 19200 or
	38400
ID Number	01h - FFh or ALL
Fan Speed	Auto or Max
OSD	Display	On / Off
	Size	Small or Large
Front L.E.D.	On / Off
ISF Settings	Normal or ISF ccc
	Underscan	On / Off
		Normal, Pure,
Runco Pro	Display Profile	Monotone or
		High-Cnt.
	Signal Type	Motion, Still or
		Non-Std.
FRC	Normal or Scaler
	Input	Input 1, 2, 3, 4 or 5 or
Power On Mode		Last
	Volume	0, 1, 2 ... 42 or Last
	Off
Seamless Switch
	On	Select 1 / Select 2:
		Input 1 - 5
Picture Orient.	Flip H, Flip V,
	Flip HV or Off
Function Reset	Yes / No

1.Menu items in italics appear only when the CinemaWall is in Installer Adjust mode. Picture and Screen settings made in Installer Adjust mode define the “zero point” for normal, “User-mode” adjustments. For example, setting Contrast in Installer Adjust mode defines the white level that results when Contrast is set to 0 in “User” mode. Menu items in bold type appear only on the CinemaWall

Models SP-50 and SP-60.

2.When adjusting the Brightness (black level) for RGB and Component HD (480p/720p/1080i) signals, use the “User mode” Brightness control. For 480i and digital video sources, either Brightness control (“User” mode or Installer Adjust mode) can be used.

Figure 4-2. CinemaWall OSD Menu Structure

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 33