Runco SP-60, SP-42, SP-50 manual Screen Menu Commands Installer Adjust Mode

Serial Communications

Table 6-1. Serial Commands (continued)

	Command		Value Range		Description
ASCII		HEX	Minimum	Maximum
GRAS24		47 52 41 53 32 34	–	–	Sets the GAMMA to 2.4.
RHI		52 48 49	000	255	Adjusts red gain (highlight).
RLW		52 4C 57	000	255	Adjusts red offset (lowlight).
SHP		53 48 50	000	015	Adjusts the SHARPNESS.
STD		53 54 44	–	–	Executes FACTORY and WHITE BAL.
					RESET commands.
TNT		54 4E 54	000	060	Adjusts the TINT.
		SCREEN Menu Commands (Installer Adjust Mode)
CFR		43 46 52	000	255	Adjusts clock (PLL) frequency.
CPH		43 50 48	000	031	Adjusts PLL phase.
FRP		46 52 50	–	–	Executes IMAGE RESET.
HPS		48 50 53	064	191	Adjusts Horizontal position .
HSI		48 49 53	000	064	Adjusts Horizontal size (width).
VPS		56 50 53	064	191	Adjusts the Vertical position.
VSI		56 53 49	000	064	Adjusts Vertical size (height).
		SET-UP Menu Commands (Installer Adjust Mode)
SVL		53 56 4C	000	020	Adjusts the sub-volume.
		OPTION Menu Commands (Installer Adjust Mode)
BPIS01		42 50 49 53 30 31	–	–	Sets BANNER PIP input to INPUT1.
BPIS02		42 50 49 53 30 32	–	–	Sets BANNER PIP input to INPUT2.
BPPS00		42 50 50 53 30 30	–	–	Sets BANNER PIP to OFF.
BPPS01		42 50 50 53 30 31	–	–	Sets BANNER PIP position to TOP.
BPPS02		42 50 50 53 30 32	–	–	Sets BANNER PIP position to
					MID-HIGH.
BPPS03		42 50 50 53 30 33	–	–	Sets BANNER PIP position to
					MID-LOW.
BPPS04		42 50 50 53 30 34	–	–	Sets BANNER PIP position to BOT-
					TOM.
BSL		42 53 4C	000	255	Adjusts BLUE sidebar level.
CLMS00		43 4C 4D 53 30 30	–	–	Sets the ISF SETTING to NORMAL.

Notes:

1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2. These settings are not stored in memory.

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 61