Runco SP-50, SP-42, SP-60 manual 4F 53 44 53 30 Sets OSD Display to OFF

Serial Communications

Table 6-1. Serial Commands (continued)

	Command			Value Range		Description
ASCII			HEX	Minimum	Maximum
OSDS00		4F 53 44 53 30 30		–	–	Sets OSD DISPLAY to OFF.
OSDS01		4F 53 44 53 30 31		–	–	Sets OSD DISPLAY to ON.
OSSS01		4F 53 53 53 30 31		–	–	Sets OSD SIZE to LARGE.
OSSS02		4F 53 53 53 30 32		–	–	Sets OSD SIZE to SMALL.
PTRS00		50	54 52 53 30 30	–	–	Sets sub-screen translucence to OFF
						(0%).
PTRS01		50	54 52 53 30 31	–	–	Sets sub-screen translucence to 10%.
PTRS02		50	54 52 53 30 32			Sets sub-screen translucence to 20%.
PTRS03		50	54 52 53 30 33			Sets sub-screen translucence to 30%.
PTRS04		50	54 52 53 30 34			Sets sub-screen translucence to 40%.
PTRS05		50	54 52 53 30 35			Sets sub-screen translucence to 50%.
PTRS06		50	54 52 53 30 36			Sets sub-screen translucence to 60%.
PTRS07		50	54 52 53 30 37			Sets sub-screen translucence to 70%.
PTRS08		50	54 52 53 30 38			Sets sub-screen translucence to 80%.
RSL		52	53 4C	000	255	Adjusts the RED sidebar level.
SLSS00		53	4C 53 53 30 30	–	–	Sets SEAMLESS SWITCH to OFF.
SLSS01		53	4C 53 53 30 31	–	–	Sets SEAMLESS SWITCH to ON.
SL1S01		53	4C 31 53 30 31	–	–	Sets SEAMLESS SWITCH SELECT 1
SL1S02		53	4C 31 53 30 32			to INPUT 1... INPUT 5.
SL1S03		53	4C 31 53 30 33
SL1S04		53	4C 31 53 30 34
SL1S05		53	4C 31 53 30 35
SL2S01		53	4C 32 53 30 31	–	–	Sets SEAMLESS SWITCH SELECT 2
SL2S02		53	4C 32 53 30 32			to INPUT 1... INPUT 5.
SL2S03		53	4C 32 53 30 33
SL2S04		53	4C 32 53 30 34
SL2S05		53	4C 32 53 30 35
USCS00		55	53 43 53 30 30	–	–	Turns the UNDERSCAN setting OFF.
USCS01		55	53 43 53 30 31	–	–	Turns the UNDERSCAN setting ON.

Notes:

1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2. These settings are not stored in memory.

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 63