yAuto Panning/Black and White Selection/Patrol Stop Button (AUTO/B/W/PATROL STOP)
AUTO: Pressing this button will activate the auto pan- ning function of cameras provided with this feature.
B/W: Pressing this after pressing the SHIFT button will display the picture in black and white on the moni- tor.
PATROL STOP: Pressing this will stop the program- ming of the camera patrol learning function.
The following four types of Auto Panning can be selected with numeric buttons 1 to 4, but not all of these types are always available depending on the camera.
For further information, refer to the Operating Instructions for the individual combination cameras.
AUTO PAN ON or Functions set on combination cam- era: Simply press this button, or press Numeric button 1
followed by this button.
AUTO SORT ON: Press Numeric button 2 followed by this button.
AUTO SEQ ON: Press Numeric button 3 followed by this button.
RANDOM PAN ON: Press Numeric button 4 followed by this button.
uWiper/Auxiliary 1 Button (WIPER/AUX1)
Pressing this button will activate the housing wiper of a camera provided with this feature. Pressing it after pressing the Shift button will turn on the AUX1 button controlling accessories connected to the camera.
The LEDs next to the button are each lit while the wiper or AUX1 mode is selected.
iFocus Buttons (FOCUS: NEAR/FAR)
These buttons are used to adjust the lens focus of cam- era equipped with the specified lens.
When these buttons are pressed simultaneously, the lens focus is set automatically if the specified camera is used.
oZoom/Iris Buttons (ZOOM: WIDE/TELE, IRIS:
CLOSE/ OPEN)
These buttons are used for zooming a camera or to close or open the lens iris of a camera equipped with the specified lens.
When these buttons are pressed for approx. 1 sec. or more simultaneously after pressing the SHIFT button, the lens iris is reset to the factory default settings.
!0Numeric Buttons (0-9)
These buttons are used for numeric input of preset numbers or for executing each parameter on the Camera Setup menu.
!1Preset/Set/Program Preset Button
(PRESET/SET/PROGRAM PRESET)
PRESET: In combination with the Numeric buttons, this button is used to move a specific camera to a pre- set position.
SET: This button is used to execute the currently high- lighted setting in the Setup menu.
PROGRAM PRESET: Pressing this while holding down the CAMERA SETUP/SETUP/PROGRAM button will program a preset position.
!2Home/Escape Button (HOME/ESC)
HOME: This button is used to return a specific camera to the home position.
ESC: This button is used to escape from the currently highlighted selection and return to the previous menu of the Setup Menu.
!3Shift Button (SHIFT)
Pressing this button in combination with buttons to which special functions have been assigned will acti- vate these functions.
The LED next to the button is lit when the button is pressed.
The LED next to the button goes off when the button is pressed again.
!4Alarm Reset/Suspend Button
(ALARM RESET/SUSPEND)
Pressing this button while the alarm function is activat- ed will reset the alarm of the system.
Pressing this button will activate the alarm suspension mode after pressing the SHIFT button.
The LED next to the button is lit while alarm suspension mode is selected.
Pressing the button after pressing the SHIFT button again will cancel the alarm suspension mode.
!5Camera Setup/Setup/Program Button
(CAMERA SETUP/SETUP/PROGRAM)
Pressing this button for 2 seconds or more after press- ing the SHIFT button will open the Camera Setup menu. Pressing it in combination with the Numeric buttons will execute the Setup menu of the System Controller. The LEDs next to the button are each lit during the Camera Setup or Setup operation.
This button is also used to program the camera patrol learning and preset position functions.
!6Slow/Camera Function Button (SLOW/CAMERA
FUNCTION)
If this button is pressed while the joystick controller is moved, pan/tilt speed will decrease.
Pressing it in combination with the numeric buttons after pressing the SHIFT button will execute camera func- tions.
7