EN Preparing your baby monitor
Parent unit
1Open the battery compartment by sliding the cover
downwards.
+
+
+
+
2Insert the two 1.2V AAA size
3Put the battery compartment cover
4Connect the AC power adapter
5Place the parent unit in the charging base
>The POWER light
6Leave the parent unit in the charging base until the batteries are fully charged (at least 16 hours).
>The POWER light
>When the batteries are fully charged, the parent unit can be taken out of the charging base and used cordlessly for at least 8 hours.
Notes:
–Operation time will be 8 hours based on the assumption that the baby unit will be transmitting 25% of the time and is in standby mode for the rest of the time (baby does not any make sound).
–When the parent unit batteries are charged for the first time, operating time will be less than 8 hours.The batteries will use their maximum capacity after at least four times charging and discharging.
10