Nikon AF-S VR, 2188 instruction manual Vibration reduction mode See page 16 for usable cameras

4.Vibration reduction mode (See page 16 for usable cameras.)

■Basic concept of vibration reduction

En

	Vibration reduction using a tripod
vibrations		Camera shake
		when taking
	Camera shake	pictures from a
		moving vehicle
Number of	Panning shots

Strength of vibrations

Set the vibration reduction mode switch to “NORMAL”.

Set the vibration reduction mode switch to “ACTIVE”.

When taking pictures	Set the vibration reduction mode switch to
	either “NORMAL” or “ACTIVE”.
When taking panning shots	Set the vibration reduction mode switch
	to “NORMAL”.
When taking pictures from	Set the vibration reduction mode switch
a moving vehicle	to “ACTIVE”.
When taking pictures using a tripod	Set the vibration reduction mode switch to
	either “NORMAL” or “ACTIVE”.

■Setting the vibration reduction ON/OFF ring switch (Fig. D)

ON: Vibration is reduced while the shutter release button is lightly pressed and also at the instant the shutter is released. Because vibration is reduced in the viewfinder, auto/manual focusing and exact framing of the subject are easier.

OFF: Vibration is not reduced.

■Setting the vibration reduction mode switch (Fig. G)

First, set the vibration reduction ON/OFF ring switch ON, then select the following mode:

NORMAL: The vibration reduction mechanism primarily reduces camera shake, making smooth panning shots possible.

ACTIVE: The vibration reduction mechanism reduces camera shake when taking pictures and those from a moving vehicle. In this mode, the lens does not automatically distinguish panning from camera shake.

20