Mounting the Camera to the Ceiling
Open hole in ceiling, connect cables and mount camera to ceiling.
1. | φ20 mm |
|
|
|
|
Preparations
1. Open a hole in the ceiling.
Use the template and open a hole in the ceiling for the cables.
MEMO
English
Video signal
Approx.10 cm
There is no need to open a hole in the ceiling when using the cable extraction
cable
2.
Power supply cable
Safety cable
3.
4.
hole on the side of the camera. ( page 8)
2. Pull out the cables from the ceiling.
Before connecting, pull out the power supply and video signal cables about 10 cm from the ceiling.
3. Attach the safety cable to the cam- era. (Safety cable not included)
Attach the safety cable to the back of the camera.
CAUTION:
¥To avoid unforeseen accidents, attach the safety cable.
¥Select a suitable safety cable based on length, strength, location, material (insulation property), etc.
¥Always use the M2.6 ⋅ 6 screws mounted on the unit.
4. Remove the dome cover.
Turn the dome cover counterclockwise and pull downwards to remove.