6[AGC - ON/OFF] Auto-gain control switch
Setting this switch to ÒONÓ automatically increases the sensitivity even when the brightness of the subject is insufficient. (Default setting: ON)
7[BLC - ON/OFF] Backlight compensation switch
Setting this switch to ÒONÓ opens the iris even in backlight conditions, making the subject easier to view.
(Default setting: OFF)
8[AUTO/MANU] Auto/manual selection switch
For selecting whether to adjust the white balance automatically or manually. (Default setting: AUTO)
9[INT/LL] Synchronization system selection switch
This switch sets the synchronizing system for the camera.
INT:
This is set for internal synchronization
LL (Line Lock):
The cameraÕs vertical synchronization is locked to the AC 24 V power line fre- quency.
When switching between multiple cam- eras using a switcher, selecting this mode and adjusting the vertical phase can re- duce the monitor sync disturbances oc- cur that when the camera image is switched.
(Default setting: INT)
10[WHT.BAL/PHASE] adjustment selection switch
Switch to select the function of the 11 [R/B. +/Ð] adjustment button.
When setting to WHT.BAL:
When the 8 [AUTO/MANU] switch is set to MANU, the white balance can be adjusted using the [R/B, +/Ð] button.
When setting to PHASE:
When the 9 [INT/LL] switch is set to LL, the vertical phase of the line lock can be adjusted using the [R/B, +/Ð] button.
(Default setting: WHT.BAL)
11[R/B, +/–] adjustment button
This button is pressed when manually adjusting the white balance or when adjusting the vertical phase of the line lock.
The function of this button is selected using the 10 [WHT.BAL/PHASE] switch.
When manually adjusting the white balance:
Press the R button to increase the red tint and decrease the blue tint.
Press the B button to increase the blue tint and decrease the red tint.
When adjusting the phase:
Press the + or Ð button to adjust the phase.
12[RESET] Reset button
When this button is pressed, the value of the white balance or phase adjusted manually is reset to the default value.
When the 10 [WHT.BAL/PHASE] switch is set to WHT.BAL, the white balance is reset to the default value. When the switch is set to PHASE, the phase is reset to the default value.
13[SPOT CORRECTION] White-spot correction button
When this button is pressed, white spots are corrected.
For instructions on correcting white- spots, see ÒAbout
English