JVC TK-C205 manual When installing the Dome camera to the electrical box, Mount the electrical box

Mounting holes

5.

Horizontal

Lock screw

6.

5. Point the camera in the direction you

	wish to capture.
	Point the camera so that the Horizontal
	Lock screw is facing the direction you wish
	to capture. The camera can be adjusted
Mounting	±60¡ horizontally to either side of the
	Horizontal Lock screw.
holes
	6. Mount the camera to the ceiling.
Screws	Use M4 screws/bolts or wood screws
	(φ4.1mm) to secure the camera in four
	places when mounting to the ceiling or wall.
	CAUTION:

English

Tighten all screws securely. Otherwise the camera may come loose and fall.

When installing the Dome camera to the electrical box

The camera can be mounted directly onto an electrical box.

1.

2.

4inch square electrical box

Mounting	Mounting
holes	holes

5. Screws

1. Open a hole in the ceiling.

Open a φ140mm hole in the ceiling.

2. Mount the electrical box.

The camera can be mounted on a 4-inch square electrical box.

For instructions on mounting the electrical box, ask your dealer.

3. Follow steps 2 to 3 of “Mounting the Camera to the Ceiling (Preparations)”.

( page 11)

4.Follow steps 1 to 6 of “Mounting the Camera to the Ceiling (Installation)”.

( page 12)

5.Mount the camera to the electrical box.

Secure the camera to the electrical box using two mounting holes.

CAUTION:

Tighten all screws properly. Otherwise the camera may come loose and fall.

E-13