Installation

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:

Volt/Ohm Meter	#2 Phillips screwdriver
Wire strippers	Battery post wrench
Wire crimpers	Soldering iron
Wire cutters	Solder
1/8" diameter heatshrink tubing	Heat gun

This section focuses on some of the vehicle considerations for installing your new Source Unit. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

!CAUTION: If you feel unsure about installing this system yourself, have it installed by a qualified Rockford Fosgate technician.

!CAUTION: Before installation, disconnect the battery negative (-) terminal to pre- vent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Source Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your Source Unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to pro- tect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

RFX9000 specifications

The Rockford Fosgate RFX9000 is a powerful and versatile 9-channel car amplifier designed to deliver exceptional audio performance in automotive sound systems. Known for its reliability and dynamic sound quality, the RFX9000 brings innovation and advanced technology to enhance the listening experience for music enthusiasts and audiophiles alike.

One of the most notable features of the RFX9000 is its high power output, capable of delivering 9000 watts peak power and 4500 watts RMS. This impressive capability ensures that it can handle high-demand audio setups without compromising on sound clarity or volume. The high-efficiency Class D amplifier technology incorporated into the RFX9000 contributes significantly to its compact design while maximizing power output, making it a great choice for those looking to save space without sacrificing performance.

The RFX9000 is equipped with comprehensive tuning options, allowing users to tailor their audio experience. The built-in DSP (Digital Signal Processor) provides advanced sound processing capabilities, enabling adjustments to equalization, crossover frequencies, and time alignment. This flexibility ensures that users can achieve optimal sound reproduction that is tailored to their vehicle's unique acoustics.

One of the defining characteristics of the RFX9000 is its robust build quality. The amplifier features a durable aluminum chassis with an anodized finish, providing resistance to heat and ensuring longevity. Additionally, the amplifier is designed for easy installation, featuring user-friendly connections and controls that simplify setup and adjustments.

To facilitate enhanced connectivity, the RFX9000 includes various input options, including RCA and high-level inputs, making it compatible with different types of head units. This versatility allows for seamless integration into existing sound systems or new installations.

The amplifier also features advanced protection circuitry, including thermal, overload, and short circuit protection, ensuring that the unit operates safely and reliably under various conditions. This technology helps to prevent damage to the amplifier and connected components, providing peace of mind for users during extensive listening sessions.

In summary, the Rockford Fosgate RFX9000 stands out as an exceptional choice for those seeking a high-powered car amplifier packed with advanced technologies, versatile tuning options, and robust build quality. It's designed for high-performance audio, making it an excellent investment for car audio enthusiasts who demand the best from their sound systems.