Elta 7537N1 manual Mode Button MOD, Eject Button, Clock Button CLK, Troubleshooting, CD Player

D)In CD / MP3 playback mode press RPT to repeat the current track, S-RPT is displayed. Press and hold RPT to repeat the current folder and D-RPT is displayed. Press RPT again to exit repeat mode.

E)In CD / MP3 playback mode press RDM to randomly repeat the all tracks, S-RDM is displayed. Press and hold RDM to randomly repeat all tracks in the folder, D-RDM is displayed. Press RDM again to exit random mode.

F)In MP3 playback mode the preset station buttons 5 and 6 access a 10-track skip up and down.

13. MODE BUTTON MOD

Toggle between radio and CD / MP3 modes.

14. EJECT BUTTON

Press to eject the disc from the CD drive.

15.CLOCK BUTTON CLK

1)In radio mode repeatedly press CLK to cycle through the display: PS NAME →

FREQUENCY → CURRENT TIME → PTY.

If no RDS data are received the display shows: FREQUENCY → CURRENT TIME → PTY.

2)In playback mode press to display the current time for 5 seconds. The display returns automatically to the previous display.

3)To set the current time press and hold CLK, until the time flashes in the display; set hours and minutes with + or -.

TROUBLESHOOTING

To solve the common problems, read and follow the troubleshooting list. If you still cannot solve the problem, consult your nearest service dealer.

Symptom	Cause	Solution
		If the power supply is properly
	The car ignition is not on.	connected to the car accessory
No power		switch, turn the ignition key to
		ACC.
	The fuse is blown.	Replace the fuse.
Disc cannot be loaded	Presence of CD disc inside the	Remove the disc in the player and i
	player.	nsert a new disc with the label up.
	Disc is inserted upside down.	Insert the compact disc with the
		label facing up.
Disc cannot be read	Compact disc is extremely dirty or	Clean the disc or try to play a new
	defective.	one.
	Temperature inside the car is too	Cool off until the ambient
		temperature returns to normal.
	high.
No sound	Volume is set to minimum.	Adjust volume to desired level.
	Wiring is not properly connected.	Check wiring.
	The built-in microcomputer is not	Press the RESET button.
The function keys do not	operating properly due to noise.
work
	Front panel is not properly fix into	Reinstall the front panel.
	its place.

	The installation angle is more		Adjust the installation angle to
Sound skips	than 30º		less than 30º.
	The disc is extremely dirty or		Clean the compact disc or play a
	defective.		new one.
The radio does not work;	The antenna cable is not		Connect the antenna cable firmly.
	connected.
the auto search function
does not work	The signals are too weak.		Select a station manually.
TECHNICAL SPECIFICATIONS
GENERAL
Power supply		DC 12V
Power consumption		max. 7A
Power output		4 X 25 W (@ 14.4V)
LINE-OUT		CD max. 800mV
FM
Frequency range		87.5MHz - 108.0MHz
Sensitivity		3 µV
IF frequency		10.7MHz
AM
Frequency range		522kHz - 1620kHz
Sensitivity		40dB
IF frequency		450kHz
CD PLAYER
System		Compact Disc Audio System
Compatible disc formats		CD / CD-R / CD-RW / MP3
Signal format		Sampling frequency 44.1kHz
Frequency characteristics		20-100Hz ≤ 5dB
		10-20kHz ≤ 5dB
S/N ratio CD		50dB @ 1kHz
Channels		2 (Stereo)
Dimensions		approx. 178 x 50 x 188 mm
Weight		approx. 1.6 kg

SUBJECT TO CHANGES WITHOUT PRIOR NOTICE.

26. 27.