Polar S710 user manual Cadence* on/off, Power* on/off, Autostart on/off AutoStrt

Page 20

METHOD 2.

 

 

Mark the tread of the front tire with a line and roll the tire

 

 

perpendicular to the ground. You can also use the valve as

 

 

a mark. Mark a line on the ground. Move your bike on a

 

 

flat surface straight ahead for one complete wheel rotation.

 

 

Check that the tire is perpendicular to the ground. Draw

 

 

another line on the ground exactly where the mark on the

 

 

front tire touches the ground.

 

 

Measure the distance between the two lines on the ground.

 

mm

 

Substract 4 mm to account for your weight on the bike to

- 4 mm

get your wheel circumference.

 

 

This is the value you must set on the meter.

 

mm

 

The wheel size is always indicated in millimetres as this is more accurate. Resetting the monitor enters the default values.

Cadence* on/off

If you start from the Time of day display, repeat steps 1-5.

6.Scroll up or down until Cadence is displayed.

7.Press OK to start setting the Cadence. On/OFF starts to flash.

8.Scroll up or down to set the Cadence on or off. Press OK.

*Optional Polar Cadence Sensor or Polar Power Output Sensor required.

B 36

Power* on/off

If you start from the Time of day display, repeat steps 1-5.

6.Scroll up or down until Power is displayed.

7.Press OK to start setting the Power Output. On/OFF starts to flash.

8.Scroll up or down to set Power Output on or off. Press OK. OFF: Skip the rest of the Power Output settings.

9.C. weight is displayed. Scroll up or down to adjust the chain weight Press OK.

10.C. length is displayed. Scroll up or down to adjust the chain length. Press OK.

11.S. length is displayed. Scroll up or down to adjust the span length. Press OK.

For more detailed information, see the Polar Power Output™ manual.

Autostart on/off (AutoStrt)

If you start from the Time of day display, repeat steps 1-5.

6.Scroll up or down until AutoStrt is displayed.

7.Press OK to start setting the autostart. On/OFF starts to flash.

8.Scroll up or down to set the autostart on or off. Press OK.

Autostart means that the receiver automatically starts or stops the exercise recording, as you start or stop moving your bicycle. To continue your settings, press the stop button or to return to the Time of day display, press and hold the stop button.

B 37

S710 man GBR/B kopio.pm6

36-37

8/3/01, 14:33

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Signal/Light Stop DownS710 man GBR/B kopio.pm6 Contents Getting Going Connection to computerPolar Fitness Test Heart rate monitor parts and their functionsUseful tips ResetButtons and their functions How to prepare the wrist receiver Installing the Polar Bike MountInstalling the Polar Speed Sensor Easy startHow to put the transmitter on How to start measuring your heart rateAfter exercising How to stop measuring your heart rateModes and their functions File Options Units HOW to Enter SettingsUser information settings Date of birth Birthday SexActivity level Activity Maximum heart rate value HRmaxExercise settings Turning heart rate limits on/off Setting timersSetting heart rate limits Setting interval type Setting the number of intervalsSetting recovery calculation Naming exercise setsSetting recording rate Rec. Rate 60sTurning functions on/off OwnCal calorie counter on/offFitness test on/off Predicted maximum heart rate on/off HRmax-pBicycle feature settings Adjusting the wheel size WheelAutostart on/off AutoStrt Power* on/offCadence* on/off Monitor settings Naming bike 1 and bikeTurning activity/button sound on/off Selecting measuring unitsTurning Help on/off Watch settingsSetting alarm Turning reminders on/off Setting time of daySetting date Exercise Setting tipsMeasure mode S710 man GBR/B kopio.pm6 46-47 Exercise recording mode Autostart for recording a cycling exerciseTurning the heart rate zone alarm on/off Pausing the exerciseIlluminating the display Swapping the heart rate limitsSelect the upper row information Swapping the displayed exercise informationSelect the middle row information Starting an exercise set Exercising with Interval Training Set Int On, E1-E5Warm-up phase Interval sessionRecovery calculation Cool-down phaseTips during the exercise Exercising with BasicSet Int OFF, E1-E5Stopping the exercise Swap the bike setting b0, b1 or b2 Resetting the trip distanceRestarting the interval or recovery calculation Interrupting an interval or recovery calculationHOW to Recall Training Information Exercise fileRecovery information of BasicSet exercise Reco Exercise time Exe. TimeExercise distance Exe. Dist Speed information Spd. Avg/ MaxCalorie expenditure KCal Cumulative calorie count Tot. KCalCumulative exercise time count Tot. Time Cumulative riding time Rid. TimeLap information Laps Best LapDeleting a file LapsRecorded samples Deleting all files Resetting your cumulative counts to zeroRecords file Returning to your previous maximum value Connection to ComputerDownloading Training Data to a Computer Uploading Settings from Computer Polar Fitness Test OwnIndexCarrying out the test Fitness test settingsPredicted maximum heart rate, HRmax-p Update OwnIndex and HRmax-p Turn the Fitness test sound signal on/offStart the test Interrupt the testMEN Fitness classesCare Maintenance Battery Replacement for Polar Speed SensorTaking care of your Polar heart rate monitor Batteries Polar T61 transmitterUsing the Polar S710 in a water environment PrecautionsService Exercise equipment Polar heart rate monitor and interferenceElectromagnetic interference Frequently Asked Questions Cannot find the previous exercise’s file?Cannot find the expended calories from my exercise file? Cannot turn my HRmax-p on?Heart symbol flashes irregularly? Battery of the wrist receiver must be replaced?Heart rate reading becomes erratic or extremely high? Display is blank or fading?Technical Specifications Limit Values Default SettingsSpeed sensor Limited Polar Warranty Polar DisclaimerDisplay symbols Polar GlossaryDisplay texts RecoHr, heart-rate-based RecoTime, time-based recoveryRecoDist, distance-based Index 46, 52S710 man GBR/B kopio.pm6 112 Road Map

S710 specifications

The Polar S710 is a sophisticated training computer designed for athletes who seek detailed analysis of their performance. Known for its robust features, this device integrates advanced heart rate monitoring, comprehensive fitness tracking, and user-friendly functionalities, making it an essential tool for serious sports enthusiasts.

One of the standout features of the S710 is its heart rate monitor, which provides real-time feedback on heart rate zones. This enables users to optimize their training by ensuring they are exercising at the correct intensity to achieve their fitness goals. The device can store detailed records of workouts, allowing athletes to review their training patterns over time and adjust their routines based on actual performance data.

The Polar S710 utilizes advanced technologies to enhance user experience. It includes GPS functionality, allowing users to track their routes and distances accurately while also calculating pace and speed in real time. This feature is particularly beneficial for runners and cyclists who want to evaluate their performance over various terrains.

In addition to heart rate monitoring and GPS tracking, the S710 offers a range of customizable training programs. Users can set their own training targets, whether it’s increasing endurance, building strength, or improving recovery times. The watch can create personalized training schedules based on user inputs, making it easier to stay committed to specific fitness goals.

Another notable characteristic of the Polar S710 is its compatibility with the Polar Flow web service. Athletes can upload their training data to this platform, allowing for in-depth analysis of performance metrics, including weekly training loads and recovery times. This capability provides a holistic view of one's fitness journey, which can be crucial for long-term progress.

The S710 is designed with a clear, backlit display, ensuring that data is easy to read during workouts, even in low-light conditions. Its lightweight yet durable construction ensures that it can withstand the rigors of training without hindering performance.

With a long battery life, the Polar S710 allows for extended training sessions without worry. Overall, the Polar S710 stands out as a comprehensive training tool that caters to the needs of dedicated athletes, combining innovative technology with user-friendly features to aid in achieving fitness success.
Top Page Image Contents