Polar S710 user manual Connection to Computer, Downloading Training Data to a Computer

Returning to your previous maximum value

Start with the display showing Max Spd, Max Cad*, Max Alt or Max Pwr* in the records file.

1.Press and hold the signal/light button to start returning to the previous value. Return OLd appears and the value starts to flash.

2.You can still cancel the reset by pressing the stop button. If you are sure you want to return to the previous value, press OK.

3.Press the stop button to exit the display.

Or, if you want to start resetting your maximum value to zero, press and hold the signal/light button. Reset VALUE starts to flash. Once your have reset the value you cannot retrieve it.

4.You can still cancel the reset by pressing the stop button. If you are sure you want to return to the previous value, press OK.

5.Press and hold the stop button to return to the Time of day display.

*Optional Polar Cadence Sensor or Polar Power Output Sensor required.

D 76

E. CONNECTION TO

COMPUTER

There is two-way communication between Polar S710 and a computer. Polar Precision Performance software offers an easy way to analyse training data. A training log makes it possible to plan future training. Wrist receiver settings are easy to upload from the software instead of entering them manually.

Downloading Training Data to a Computer

1.Start the software.

2.Connect the Polar IR Interface to the serial port (RS-232) of your computer.

3.If the receiver is in the Time of day display scroll up or down until CONNECT is displayed.

4.Point the infrared window of the receiver towards the infrared window

of the interface. The maximum infrared transfer distance is 15 cm/ 6" and the infrared transfer angle ± 15 degrees.

5.Activate the heart rate monitor connection function of the software. Your receiver should now communicate with the computer. The receiver automatically returns to the Time of day display after data transfer.

E 77

S710 man GBR/B kopio.pm6 76-77

8/3/01, 14:34